17 22 095 2102 HARTING, 17 22 095 2102 Datasheet - Page 8

• Manufacturer Part Number: 17 22 095 2102
• Description: PCB CONNECTOR
• Manufacturer: HARTING

Specifications of 17 22 095 2102

• Connector Type: HARD METRIC (HM)
• Gender: PIN
• No. Of Contacts: 95
• Pitch Spacing: 2MM SERIES
• Contact Plating: GOLD
• No Of Rows 5: LEADED PROCESS COMPATIBLE

00 .
06
Circuit density
HARTING offers 13 contact lengths for
male connectors: the standard mating length
of 8.2 mm, pre-leading contacts with 9.7 mm
and extra long contacts preferred for shielding
with 11.2 mm mating length.
On the termination side the standard length is 3.7 mm.
With the three termination lengths of 13.0, 14.5
and 16.0 mm even for rear I/O applications different
mating levels are possible, depending on the pcb
thickness and shroud height.
Contact dimensions [mm]
When using the specified diameter of the finished
through hole according to IEC 61 076-4-101
(0.6 ± 0.05 mm) with an appropriate annular ring,
the remaining distance between the rings is about
1 mm. Under the condition that the width of the track
and the space between should be equal, two tracks
of 0.2 mm width or three tracks of 0.14 mm width
can be placed between two rings. Typical designs
are shown in the drawing on the right side.
Contacts for male connectors
For the standard termination length, an extra short
contact for special applications with a mating length
of 7.2 mm is available.
The different contact lengths are designated with
letters to identify them in the configurations. For
special loadings please use the customer request
form at the end of this catalogue.
All contacts are offered with press-in termination ‘eye
of the needle’. In accordance with the application
they can be delivered in performance level 1 or 2.