ENW-C9A25C1EF Panasonic - ECG, ENW-C9A25C1EF Datasheet - Page 5

• Manufacturer Part Number: ENW-C9A25C1EF
• Description: RF MODULE 802.15.4 W/PADS NO SW
• Manufacturer: Panasonic - ECG
• Series: PAN4561r

Specifications of ENW-C9A25C1EF

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: General Purpose
• Power - Output: 10dBm
• Sensitivity: -102dBm
• Voltage - Supply: 2.7 V ~ 3.4 V
• Current - Receiving: 47mA
• Current - Transmitting: *
• Data Interface: PCB, Surface Mount
• Memory Size: 60kB Flash, 4kB RAM
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ENWC9A25C1EF

CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN4561H /M /L
3. DESCRIPTION OF THE MODULE
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
The PAN4561with module is a short range, low power, 2.4 GHz ISM band transceiver which
includes a complete 802.15.4 physical layer (PHY) modem, designed for the IEEE 802.15.4
wireless standard and an appropriate microcontroller (MCU) with reference oscillator which
provides a cost effective solution for short-range data links and networks.
There are three versions of PAN4561 available, identified by an H, M or L at the end of series
number i.e. PAN4561H, PAN4561M, PAN4561L. The addional letter stands for High, Mid and
Low range.
All modules in the PAN4561 series are based on the FreeScale MC13213 SOC, fully featured
with 39 I/O lines, interchangeable and share a common footprint and software. Mixed node
networks can be implemented to conserve power while maximizing range. The PAN4561L is a
cost optimized module designed for standard range applications of less than 30 meters. For
medium range applications the PAN4561M, is optimized to deliver longer range and conserve
power consumption, using a low noise amplifier and 10dBm power amplifier. The PAN4561H is
designed for extended range applications, using a low noise amplifier and 20dBm power
amplifier.
In this document when mentioned PAN4561 the information refers to all three module types.
Data which apply only to a specific module (PAN4561 H /M /L) will be marked accordingly.
Software solutions available for the PAN4561 are SNAP software from Synapse Wireless Inc.
and SN55 software from E-Senza Technologies GmbH which are very easy to use. For detailed
information refer to SNAP [9] and and to SN55 [8].
In addition, you are free to develop also your own application on the software package from
Freescale™, e.g. SMAC, for details please refer to [4], [5], [6] and [7].
For the Integrated Development Environment (IDE) the Metrowerks
www.metrowerks.com
the USB HCS08/HCS12 Multilink from
MODEM FOR 802.15.4 IEEE STANDARD
is required. For device flash programming via the BDM port of PAN4561
PRODUCT SPECIFICATION
PANASONIC PART NUMBER
ENWC9A22xxEF / .25xx. / .21xx.
www.pemicro.com
is recommended.
No.
DS-4561-2400-102
PAGE
DATE
TM
www.pedeu.pansonic.de
CodeWarrior IDE from
06.08.2010
5 of 34
REV.
G