0638191100 Molex Inc, 0638191100 Datasheet - Page 7

• Manufacturer Part Number: 0638191100
• Manufacturer: Molex Inc
• Type: Hand Crimp Toolr

Specifications of 0638191100

• Lead Free Status / RoHS Status: RoHS Not Applicable

Hand Crimp Tool For .093” & .125” Pin and Socket and Commoning Crimp Terminals
Doc No: ATS-638191100
Revision: A
Warranty
Miscrimps or Jams
Should this tool ever become stuck or
jammed in a partially closed position,
Not force the handles open or closed.
The tool will open easily by pressing up on
the ratchet release lever in the movable
handle. See Figure 11
How to Adjust Tool Preload
(See Figure 10)
This hand tool is factory preset to 25-45
LBS. preload. It may be necessary over
the life of the tool to adjust tool handle
preload force. Listed below are the steps
required to adjust the crimping force of the hand tool to obtain proper crimp conditions:
1. Hold the hand tool in the palm of your hand as shown in Figure 12. Using the index finger squeeze the link
2. Rotate the setting wheel counter-clockwise (CCW) to increase handle force. The numbers will display higher.
3. Release the link to lock the setting wheel in place.
4. Check the crimp specifications or conduct a pull test after tool handle preload force is adjusted.
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital
components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30
days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will
not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping,
fixturing, or use of handle extensions voids this warranty.
towards the top of the hand tool frame. This will release the preload adjustment wheel.
To decrease handle force, rotate the setting wheel clockwise (CW).
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
Release Date: 01-09-08
Revision Date: 01-09-08
Do
SETTING
WHEEL
UNCONTROLLED COPY
RELEASE LEVER
RATCHET
THE HANDLE
THE LINK IN
SQUEEZE
Figure 12
TOOL IN POSITION
HOLD THE HAND
Page 7 of 9