CP-BNCPC-017 Emerson Network Power, CP-BNCPC-017 Datasheet - Page 210

• Manufacturer Part Number: CP-BNCPC-017
• Manufacturer: Emerson Network Power
• Type: BNCr

Specifications of CP-BNCPC-017

• Gender: RCP
• Body Style: Right Angle
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 85C
• Operating Frequency: 0 to 4
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass/BeCu
• Body Material: Zinc/Brass
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Compliant

210
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
MMCX Straight Plug for .047 (1.19) Diameter
and RG-178 Size Flexible Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
CABLE GROUP
RG-178/U, 196
.047 Flexible
•
1. Identify piece parts. (3 piece parts)
2. Strip cable jacket to dimensions shown. Do not nick
3. Slide crimp insert over braid and against jacket, fold
4. Assemble contact assembly onto cable as shown.
5. Slide body assembly over contact and crimp insert,
www.EmersonNetworkPower.com/connectivity
braid or center conductor during strip operations.
braid around crimp insert as shown. Strip dielectric to
dimension shown. Tin center conductor if contact is
to be soldered attached. Do not tin center conductor
if contact is to be crimp attached.
Solder attachment: Solder contact to center con-
ductor. Care should be taken that excess solder is not
applied.
Crimp attachment: Crimp contact to center conductor
using Johnson hand tool 140-0000-952 and die set
140-0000-953. Crimp location should be centered
between end of contact and cross-hole. Crimp
attachment to solid center conductor cables is not
recommended.
then seat firmly as shown. Crimp body using recom-
mended crimp die hex. Maintain forward pressure on
cable while crimping.
135-3436-001
135-3402-001
PART NO.
.135 (3.43) .105 (2.67) x .250 (6.35) W
.184 (4.67) .105 (2.67) x .250 (6.35) W
“L”
CRIMP HEX