CP-BNCPC-017 Emerson Network Power, CP-BNCPC-017 Datasheet - Page 235

• Manufacturer Part Number: CP-BNCPC-017
• Manufacturer: Emerson Network Power
• Type: BNCr

Specifications of CP-BNCPC-017

• Gender: RCP
• Body Style: Right Angle
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 85C
• Operating Frequency: 0 to 4
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass/BeCu
• Body Material: Zinc/Brass
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Compliant

SMA Clamp Type Right Angle
Plugs for Flexible Cable
Connectivity Solutions
Tel: [phone]
RG-316/U, 161,
RG-55/U, 142,
•
RG-178/U,
RG-58/U,
Fax: [phone]
174, 188
141, 303
233, 400
GROUP
CABLE
196
Assembly Instructions
142-0202-101
142-0202-106
142-0203-101
142-0203-106
142-0207-101
142-0207-106
142-0207-101
142-0207-106
PART
•
NO.
1. Identify connector parts. (4 piece parts)
2. Strip cable to dimensions shown. Do not nick braid
3. Flare braid and slide cable into body making certain
4. Solder center conductor to contact through the rear
www.EmersonNetworkPower.com/connectivity
or center conductor. A wire stripper of correct size is
recommended for this step. Twist stranded center
conductor into tight bundle and tin (optional). Slide
clamp nut and clamp cone onto cable as shown.
Clamp cone must be oriented as shown for each size
of cable. The RG-58/142 clamp cone slides over braid
and against jacket.
that the cable insulation bottoms on center contact.
Stepped down diameter of stem must slide under
braid and jacket. Arrange braid uniformly around
crimp stem. Slide clamp nut against clamp cone and
braid and tighten to 10 in.-lb. torque.
access port. Use a minimum amount of solder for
a full fillet joint. .020 (0.51) diameter solder is rec-
ommended. Place expansion cap in access port and
seat with .187 (4.75) diameter flat punch.
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
.395 (10.03)
.395 (10.03)
.420 (10.67)
.420 (10.67)
.280 (7.11)
.280 (7.11)
.280 (7.11)
.280 (7.11)
“A”
.053 (1.35)
.053 (1.35)
.053 (1.35)
.053 (1.35)
.160 (4.06)
.160 (4.06)
.180 (4.57)
.180 (4.57)
“B”
.085 (2.16)
.085 (2.16)
.085 (2.16)
.085 (2.16)
None
None
None
None
“C”
235