CP-BNCPC-017 Emerson Network Power, CP-BNCPC-017 Datasheet - Page 257

• Manufacturer Part Number: CP-BNCPC-017
• Manufacturer: Emerson Network Power
• Type: BNCr

Specifications of CP-BNCPC-017

• Gender: RCP
• Body Style: Right Angle
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 85C
• Operating Frequency: 0 to 4
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass/BeCu
• Body Material: Zinc/Brass
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Compliant

Standard UHF Straight 2-Piece Crimp Type Jack
for Flexible Cable
PART NO.
CPF-249-1
Connectivity Solutions
CABLE
RG-58
WIRE GAUGE
20
Tel: [phone]
WIRE DECIMAL
.325 (0.83)
•
Fax: [phone]
.185 (4.70)-.205 (5.21)
JACKET O.D.
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
(BRAID HEX)
.320 (8.13)
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
CRIMP
1. Identify connector parts. (2 piece parts)
2. Slide crimp sleeve over cable and strip
3. Flair braid and fold back. Strip cable insu-
4. Insert center conductor into the guide hole
5. Arrange braid uniformly around crimp stem.
cable jacket to dimension shown. Do not
nick braid or center conductor during strip
operations.
lation to dimension shown. Do not nick
center conductor.
found in the rear of the connector body.
Twist the body onto the center conductor
until the cable insulation butts up to the
body.
Slide crimp sleeve over braid and crimp
securely using recommended crimp tool.
(STRAIN RELIEF)
.211 (5.36)
CRIMP
RECOMMENDED
CRIMP TOOL
24-9858P
257