KSZ8842-PMQL Micrel Inc, KSZ8842-PMQL Datasheet - Page 54
![2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI Bus Interface( )](/photos/6/81/68152/576-128-pqfp_sml.jpg)
KSZ8842-PMQL
Manufacturer Part Number
KSZ8842-PMQL
Description
2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI Bus Interface( )
Manufacturer
Micrel Inc
Specifications of KSZ8842-PMQL
Controller Type
Ethernet Switch Controller
Interface
PCI
Voltage - Supply
3.1 V ~ 3.5 V
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
128-MQFP, 128-PQFP
Number Of Primary Switch Ports
2
Internal Memory Buffer Size
32
Operating Supply Voltage (typ)
3.3V
Fiber Support
Yes
Integrated Led Drivers
Yes
Phy/transceiver Interface
MII
Power Supply Type
Analog/Digital
Package Type
PQFP
Data Rate (typ)
10/100Mbps
Vlan Support
Yes
Operating Temperature (max)
70C
Operating Temperature (min)
0C
Pin Count
128
Mounting
Surface Mount
Jtag Support
No
Operating Supply Voltage (max)
3.5V
Operating Supply Voltage (min)
3.1V
Operating Temperature Classification
Commercial
Data Rate
100Mbps
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
576-1636 - BOARD EVALUATION KSZ8842-PMQL
Current - Supply
-
Lead Free Status / RoHS Status
Compliant, Lead free / RoHS Compliant
Other names
576-1513-5
KSZ8842-PMQL
KSZ8842-PMQL
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
KSZ8842-PMQLI
Manufacturer:
TI
Quantity:
3 100
Micrel, Inc.
Switch Global Control Register 2 (Offset 0x0404): SGCR2
This register contains the global control for the switch function.
October 2007
10 – 9
Bit
15
14
13
12
11
8
7
6
5
4
Default
0
0
0
0
0
0
0
1
1
1
1
R/W
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Description
802.1Q VLAN enable
1 = 802.1Q VLAN mode is turned on. VLAN table needs to set up before
the operation.
0 = 802.1Q VLAN is disabled.
IGMP snoop enable
1 = IGMP snoop is enabled. All the IGMP packets will be forwarded to the
host port.
0 = IGMP snoop is disabled.
IPv6 MLD snooping enable
1 = enable IPv6 MLD snooping
IPv6 MLD snooping option
1 = enable IPv6 MLD snooping option.
Priority Scheme select
0 = always TX higher priority packets first
1 = Weighted Fair Queuing enable. When all 4 queues has packets
waiting to TX, the bandwidth allocation is q3:q2:q1:q0 = 8:4:2:1. If any
queues is empty, the highest non-empty queue will get one more
weighting. For example, if q2 is empty, q3:q2:q1:q0 will become (8+1): 0
:2 : 1.
Reserved.
For factory test purposes only. Always write 0.
Sniff mode select
1 = will do RX AND TX sniff (both source port and destination port need to
match)
0 = will do RX OR TX sniff (Either source port or destination port needs to
match). This is the mode used to implement rx only sniff.
Unicast port-VLAN mismatch discard
1 = all packets can not cross VLAN boundary
0 = unicast packets (excluding unknown/multicast/broadcast) can cross
VLAN boundary
Multicast storm protection disable
1 = “Broadcast Storm Protection” does not include multicast packets. Only
DA = FFFFFFFFFFFF packets will be regulated.
0 = “Broadcast Storm Protection” includes DA = FFFFFFFFFFFF and
DA[40] = 1 packets.
Back pressure mode
1 = carrier sense based backpressure is selected
0 = collision based backpressure is selected
Flow control and back pressure fair mode
1 = fair mode is selected. In this mode, if a flow control port and a non-
flow control port talk to the same destination port, packets from the non-
flow control port may be dropped. This is to prevent the flow control port
from being flow controlled for an extended period of time.
0 = in this mode, if a flow control port and a non-flow control port talk to
the same destination port, the flow control port will be flow controlled.
This may not be “fair” to the flow control port.
54
KSZ8842-PMQL/PMBL
M9999-100207-1.5