DS21455 Maxim Integrated Products, DS21455 Datasheet - Page 153

• Manufacturer Part Number: DS21455
• Description: Network Controller & Processor ICs Quad E1-T1-J1 Single -Chip Transceiver (S
• Manufacturer: Maxim Integrated Products

Specifications of DS21455

• Product: Framer
• Number Of Transceivers: 4
• Data Rate: 64 Kbps
• Supply Voltage (max): 3.465 V
• Supply Voltage (min): 3.135 V
• Supply Current (max): 328 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Package / Case: BGA

24.3.3 FIFO Information
The transmit FIFO buffer-available register indicates the number of bytes that can be written into the
transmit FIFO. The count from this register informs the host as to how many bytes can be written into the
transmit FIFO without overflowing the buffer.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
Bits 0 to 7/Transmit FIFO Bytes Available (TFBAO to TFBA7). TFBA0 is the LSB.
24.3.4 Receive Packet Bytes Available
The lower 7 bits of the receive packet bytes available register indicate the number of bytes (0 through
127) that can be read from the receive FIFO. The value indicated by this register (lower 7 bits) informs
the host as to how many bytes can be read from the receive FIFO without going past the end of a
message. This value will refer to one of four possibilities: the first part of a packet, the continuation of a
packet, the last part of a packet, or a complete packet. After reading the number of bytes indicated by this
register, the host then checks the HDLC information register for detailed message status.
If the value in the HxRPBA register refers to the beginning portion of a message or continuation of a
message then the MSB of the HxRPBA register will return a value of 1. This indicates that the host can
safely read the number of bytes returned by the lower 7 bits of the HxRPBA register but there is no need
to check the information register since the packet has not yet terminated (successfully or otherwise).
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
Bits 0 to 6/Receive FIFO Packet Bytes Available Count (RPBA0 to RPBA6). RPBA0 is the LSB.
Bit 7/Message Status (MS).
0 = bytes indicated by RPBA0 through RPBA6 are the end of a message. Host must check the INFO5 or INFO6
register for details.
1 = bytes indicated by RPBA0 through RPBA6 are the beginning or continuation of a message. The host does not
need to check the INFO5 or INFO6 register.
TFBA7
MS
7
0
7
0
RPBA6
TFBA6
H1TFBA, H2TFBA
HDLC # 1 Transmit FIFO Buffer Available
HDLC # 2 Transmit FIFO Buffer Available
9Fh, Afh
H1RPBA, H2RPBA
HDLC # 1 Receive Packet Bytes Available
HDLC # 2 Receive Packet Bytes Available
9Ch, Ach
6
0
6
0
RPBA5
TFBA5
5
0
5
0
TFBA4
RPBA4
4
0
4
0
153 of 270
TFBA3
RPBA3
3
0
3
0
RPBA2
TFBA2
2
0
2
0
TFBA1
RPBA1
1
0
1
0
RPBA0
TFBA0
0
0
0
0