72-1015 TENMA, 72-1015 Datasheet - Page 24
![MULTIMETER, DIGITAL, BENCH, 3-3/4 DIGIT](/photos/27/66/276647/4720264_sml.jpg)
72-1015
Manufacturer Part Number
72-1015
Description
MULTIMETER, DIGITAL, BENCH, 3-3/4 DIGIT
Manufacturer
TENMA
Datasheet
1.72-1015.pdf
(56 pages)
Specifications of 72-1015
Dmm Type
Bench
Voltage Measuring Range Dc
600mV To 1000V
Voltage Measuring Range Ac
600mV To 1000V
Current Measuring Range Dc
60µA To 10A
Current Measuring Range Ac
60µA To 10A
Lead Free Status / RoHS Status
na
D. Testing Continuity (See figure 6)
To avoid damage to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before testing for continuity.
To avoid personal injury, please do not attempt to
input voltages higher than 60V DC or 30V AC.
To test for continuity, connect the Meter as below:
1.
2.
3.
4.
22
Insert the red test lead into the
black test lead into the COM terminal.
Set the rotary switch to
button to select
Connect the test lead across with the object being
measured. The buzzer sounds if the resistance of a
circuit under test is < 70 , the circuit is in good
condition. The buzzer does not sound if the resistance
of a circuit under test is >70 , the circuit is broken.
The measured value shows on the display and the
Warning
unit is
.
measurement mode.
and press SELECT
terminal and the
Model 72-1015: OPERATING MANUAL
(Figure 6)