72-1015 TENMA, 72-1015 Datasheet - Page 27

• Manufacturer Part Number: 72-1015
• Description: MULTIMETER, DIGITAL, BENCH, 3-3/4 DIGIT
• Manufacturer: TENMA

Specifications of 72-1015

• Dmm Type: Bench
• Voltage Measuring Range Dc: 600mV To 1000V
• Voltage Measuring Range Ac: 600mV To 1000V
• Current Measuring Range Dc: 60µA To 10A
• Current Measuring Range Ac: 60µA To 10A
• Lead Free Status / RoHS Status: na

Model 72-1015: OPERATING MANUAL
To test a diode out of a circuit, connect the Meter as follows:
1.
2.
3.
Note
l
l
Insert the red test lead into
test lead into the COM terminal.
Set the rotary switch to
button to select
For forward voltage drop readings on any
semiconductor component, place the red test lead
on the component’s anode and place the black test
lead on the component’s cathode. The measured
value shows on the display.
Connect the test leads to the proper terminals as
said above to avoid error display. The LCD will
display OL indicating diode being tested is open or
polarity is reversed. The unit of diode is Volt (V),
displaying the forward voltage drop readings.
Open circuit voltage is around 2.7V.
measurement mode.
terminal and the black
and press SELECT
l
When diode testing is completed, disconnect the test
leads from the device under test, and remove the
test leads from the input terminals of the meter.
25