0750180014 Molex Inc, 0750180014 Datasheet - Page 7

• Manufacturer Part Number: 0750180014
• Description: Conn Board to Board HDR 108 POS 1.5mm Solder RA Thru-Hole Tray
• Manufacturer: Molex Inc
• Type: Board to Boardr
• Series: Plateau HS Dock™ 75018r

Specifications of 0750180014

• Pitch: 1.5 mm
• Number Of Rows: 3
• Number Of Contacts: 108
• Gender: HDR
• Contact Plating: Gold|Tin-Lead
• Termination Method: Solder
• Connector Type: Shrouded
• Number Of Positions: 108
• Number Of Positions Loaded: All
• Row Spacing: -
• Height Stacking (mating): -
• Molding Height Above Board: 0.424" (10.78mm)
• Contact Mating Length: -
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Features: Board Guide
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REVISION:
DOCUMENT NUMBER:
C
5.4 Inspection:
NOTE: The Ground Peg has been tested and qualified without protruding below the surface of the PCB. This
AS-75005-001
ECR/ECN INFORMATION:
EC No:
DATE:
connector uses a Pin-thru-Paste application and only requires that >50% of the peg is covered with
solder with a solder fillet at the top.
UCP2003-2204
2003 / 04 / 09
APPLICATION SPECIFICATION
HIGH SPEED MEZZANINE
TITLE:
CREATED / REVISED BY:
Ken Stiles
Best Case 100% Peg Coverage
Worst Case 50% Peg Coverage
BOARD TO BOARD CONNECTOR SYSTEM
APPLICATION SPECIFICATION FOR THE
Nominal 0.072(1.83mm) thick board
Nominal 0.072(1.83mm) thick board
With 50% Hole Fill.
With 50% Hole Fill.
A good solder joint requires 50% Peg Coverage MIN.,
A good solder joint requires 50% Peg Coverage MIN.,
with a solder fillet at the top of the joint.
with a solder fillet at the top of the joint.
Nominal 0.062(1.57mm) thick board
Nominal 0.062(1.57mm) thick board
With 100% Peg Coverage.
With 100% Peg Coverage.
A good solder joint requires 50% Peg Coverage MIN.,
A good solder joint requires 50% Peg Coverage MIN.,
with a solder fillet at the top of the joint.
with a solder fillet at the top of the joint.
Solder Fillet
Solder Fillet
HIGH SPEED MEZZANINE
Solder Fillet
Solder Fillet
CHECKED BY:
Ken Stiles
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
Manny Banakis
APPROVED BY:
SHEET No.
7
of
9