C702 10M008 1214 Amphenol, C702 10M008 1214 Datasheet - Page 6

• Manufacturer Part Number: C702 10M008 1214
• Manufacturer: Amphenol
• Type: Smart Cardr

Specifications of C702 10M008 1214

• Ejector Type: Pushmatic
• Gender: HDR
• Mounting Style: Through Hole
• Termination Method: Solder
• Body Orientation: Right Angle
• Contact Pitch (mm): 2.54mm
• Number Of Contact Rows: 2
• Number Of Contacts: 16POS
• Operating Temp Range: -25C to 85C
• Insertion Force: 12
• Product Height (mm): 6.4mm
• Product Depth (mm): 50.1mm
• Product Length (mm): 64.5mm
• Contact Pitch: 2.54mm
• Lead Free Status / RoHS Status: Compliant

6
C700 Smart Card Connectors: General Information
Chip Cards
Chip Cards, Smart Cards, IC Cards or
whatever application specific term is used ...
have one thing in common:
• the outside dimensions, standardized acc.
• and the position of the contact pads,
The most used chip contacts are:
Type ID-1, Chip middle position (ISO)
Type ID-1, Chip outer position (AFNOR)
SIM/SAM-Card, ID-000, GSM 11.11
MultiMediaCard, acc. to
MMCA - Spezification
Secure Digital Memory Card,
acc. to SDA - Spezification
to ISO 7810, the size of a common credit
card
(which connect the embedded IC chip) are
fixed according to ISO 7816.
Amphenol Smart Card
Connectors
Smart Card Connectors are integral com-
ponents of a smart card reader or terminal,
and provide electrical contact to the smart
card’s pads. The connector is not a stand
alone peripheral device.
An additional interface circuit is necessary
to be able to read and write to the smart
card whether a smart card is a memory
only or a microprocessor card. Amphenol
Smart Card Connectors are designed to
make secure contact to all cards designed
according to ISO 7816 and thus ensure a
reliable data transmission.
The communication with the chip card can
begin when the card is fully inserted and
the data contacts are all connected. At this
point an integral card presence switch is
activated and signals to the connected cir-
cuitry that the card is ready to be read and
written to.
Smart Card Connectors for payment
systems according to EMV (Europay
Mastercard Visa / Integrated Circuit Card
Specification for Payment Systems) have a
specific card end position switch which
detects the insertion and removal of a
Smart Card.