W2S130-AA25-01 EBM-Papst Industries Inc, W2S130-AA25-01 Datasheet - Page 3

• Manufacturer Part Number: W2S130-AA25-01
• Description: FAN EXHAUST 150 X 55MM 115VAC
• Manufacturer: EBM-Papst Industries Inc
• Series: W2S130r
• Type: Roundr

Specifications of W2S130-AA25-01

• Current Type: AC
• Supply Voltage: 115 V
• Bearing Type: Ball
• Termination Style: 53 dB(A)
• Fan Type: Tubeaxial
• Size / Dimension: Round - 150mm Dia x 55mm W
• Voltage Rating: 115VAC
• Power (watts): 38W
• Rpm: 3250 RPM
• Noise: 53 dB(A)
• Air Flow: 223.6 CFM (6.33m³/min)
• Termination: 2 Wire Leads
• Weight: 2.5 lbs (1.1kg)
• Speed: 3250 RPM
• Frame Dimensions (mm): 150 mm x 55 mm
• Housing Material: Aluminum Die-Cast
• Power Rating: 38 W
• External Depth: 55mm
• External Diameter: 150mm
• Flow Rate: 225CFM
• Noise Rating: 52dBA
• Power Connection Type: Lead Wires
• Diameter: 150mm
• Brand/series: W2S130
• Dimensions: 5.91 x 2.17 "
• Direction: Exhaust over Struts
• Noise Level: 53 dBA
• Power, Rating: 38 W
• Size: 5.91 x 2.17 (150 x 55) In. (mm)
• Temperature, Operating, Maximum: +80 °C
• Voltage, Rating: 115 VAC
• Flow Rate - Imperial: 225CFM
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Static Pressure: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 381-1121; W2S130AA2501

2. PROPER USE
The device is exclusively designed as a built-in device for moving air
according to its technical data.
Any other or secondary use is deemed improper and constitutes a
misuse of the device.
Installations on the customer's side must meet the mechanical, thermal
and service life-related stresses that can occur.
Proper use also includes:
Improper use
Using the device in the following ways is particularly prohibited and
may cause hazards:
Item no.: 10953-5-9970 · Revision status: KM70969 · Print-out on 29/10/2010 · Created by A. Kehm (VM---) · Page 3 of 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone: [phone] · Fax: [phone] · [e-mail] · www.ebmpapst.com
W2S130-AA25-01
Moving air with a density of 1.2 kg/m³.
Using the device in accordance with the permitted ambient
temperature, see chapter 3.5 Storage conditions and
chapter 3.2 Nominal data.
Operating the device with all protective features in place.
Minding the operating instructions.
Moving air that contains abrasive particles.
Moving highly corrosive air, e.g. salt spray mist. Exceptions are
devices that are intended for salt spray mist and protected accordingly.
Moving air that contains dust pollution, e.g. suctioning off saw dust.
Operating the device close to flammable materials or components.
Operating the device in an explosive atmosphere.
Using the device as a safety component or for taking on safety-
related functions.
In addition, all application options that are not listed under proper use.
Operating instructions