W2S130-AA25-01 EBM-Papst Industries Inc, W2S130-AA25-01 Datasheet - Page 8

• Manufacturer Part Number: W2S130-AA25-01
• Description: FAN EXHAUST 150 X 55MM 115VAC
• Manufacturer: EBM-Papst Industries Inc
• Series: W2S130r
• Type: Roundr

Specifications of W2S130-AA25-01

• Current Type: AC
• Supply Voltage: 115 V
• Bearing Type: Ball
• Termination Style: 53 dB(A)
• Fan Type: Tubeaxial
• Size / Dimension: Round - 150mm Dia x 55mm W
• Voltage Rating: 115VAC
• Power (watts): 38W
• Rpm: 3250 RPM
• Noise: 53 dB(A)
• Air Flow: 223.6 CFM (6.33m³/min)
• Termination: 2 Wire Leads
• Weight: 2.5 lbs (1.1kg)
• Speed: 3250 RPM
• Frame Dimensions (mm): 150 mm x 55 mm
• Housing Material: Aluminum Die-Cast
• Power Rating: 38 W
• External Depth: 55mm
• External Diameter: 150mm
• Flow Rate: 225CFM
• Noise Rating: 52dBA
• Power Connection Type: Lead Wires
• Diameter: 150mm
• Brand/series: W2S130
• Dimensions: 5.91 x 2.17 "
• Direction: Exhaust over Struts
• Noise Level: 53 dBA
• Power, Rating: 38 W
• Size: 5.91 x 2.17 (150 x 55) In. (mm)
• Temperature, Operating, Maximum: +80 °C
• Voltage, Rating: 115 VAC
• Flow Rate - Imperial: 225CFM
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Static Pressure: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 381-1121; W2S130AA2501

4.5 Checking the connections
4.6 Switch on device
Inspect the device for visible external damage and the proper function of
the protective features before switching it on.
4.7 Switching off the device
Item no.: 10953-5-9970 · Revision status: KM70969 · Print-out on 29/10/2010 · Created by A. Kehm (VM---) · Page 8 of 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone: [phone] · Fax: [phone] · [e-mail] · www.ebmpapst.com
W2S130-AA25-01
Make sure that the power is off (all phases).
Secure it from being switched on again.
Check the correct fit of the connection lines.
Apply the nominal voltage to the voltage supply.
Disconnect the device from the supply voltage.
WARNING
Hot motor housing
Fire hazard
Ensure that no combustible or flammable materials are
located close to the fan.
Operating instructions
5. MAINTENANCE, MALFUNCTIONS, POSSIBLE
CAUSES AND REMEDIES
Do not perform any repairs on your device. Return the device to ebm-
papst for repair or replacement.
Malfunction/error
Motor does not turn
Impeller running
roughly
Overtemperature of
motor
WARNING
Terminals and connections have voltage even with a
unit that is shut off
Electric shock
CAUTION
The motor restarts automatically when operating voltage
is applied, e.g. after a power failure.
Danger of injury
If the device remains out of use for some time, e.g. when in
storage, we recommend switching the device on for at least 2
hours to allow any condensate to evaporate and to move the
bearings.
If you have any other problems, contact ebm-papst.
Wait for five minutes after disconnecting the voltage at all
poles before touching the unit.
Keep out of the danger zone of the device.
When working on the device, switch off the mains
supply voltage and secure the latter from being switched on
again.
Wait until the device stops.
Possible cause
Mechanical blockage
Mains supply voltage
faulty
Faulty connection
Thermal overload
protector responded
Imbalance in rotating
parts
Ambient temperature
too high
Unacceptable
operating point
Insufficient cooling
Possible remedy
Switch off, de-
energise, and remove
mechanical blockage
Check mains supply
voltage, restore power
supply
Correct connection,
see connection diagram
Allow motor to cool
off, locate and rectify
cause of error, if
necessary cancel
restart lock-out
Clean the device, if
imbalance still evident
after cleaning, replace
device
Lower ambient
temperature if possible
Check operating point
Improve cooling