LAN9118-MT Standard Microsystems (SMSC), LAN9118-MT Datasheet - Page 72

• Manufacturer Part Number: LAN9118-MT
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9118-MT

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 100
• Lead Free Status / RoHS Status: Compliant

Revision 1.5 (07-11-08)
12-11
BITS
2-0
10
9
8
7
6
5
4
3
Reserved
TX Data FIFO Overrun Interrupt (TDFO). Generated when the TX data
FIFO is full, and another write is attempted.
TX Data FIFO Available Interrupt (TDFA). Generated when the TX data
FIFO available space is greater than the programmed level.
TX Status FIFO Full Interrupt (TSFF). Generated when the TX Status
FIFO is full.
TX Status FIFO Level Interrupt (TSFL). Generated when the TX Status
FIFO reaches the programmed level.
RX Dropped Frame Interrupt (RXDF_INT). This interrupt is issued
whenever a receive frame is dropped.
Reserved
RX Status FIFO Full Interrupt (RSFF). Generated when the RX Status
FIFO is full.
RX Status FIFO Level Interrupt (RSFL). Generated when the RX Status
FIFO reaches the programmed level.
GPIO [2:0] (GPIOx_INT). Interrupts are generated from the GPIO’s.
These interrupts are configured through the GPIO_CFG register.
DESCRIPTION
DATASHEET
72
High Performance Single-Chip 10/100 Non-PCI Ethernet Controller
R/WC
R/WC
R/WC
R/WC
R/WC
R/WC
R/WC
R/WC
TYPE
RO
RO
SMSC LAN9118
DEFAULT
Datasheet
000
0
0
0
0
0
0
0
-
-