PLRXXL-SC-S43-C1 JDS UNIPHASE, PLRXXL-SC-S43-C1 Datasheet - Page 17

no-image

PLRXXL-SC-S43-C1

Manufacturer Part Number
PLRXXL-SC-S43-C1
Description
Manufacturer
JDS UNIPHASE
Datasheet

Specifications of PLRXXL-SC-S43-C1

Number Of Receivers
1
Operating Temperature Classification
Commercial
Operating Temperature (max)
70C
Operating Temperature (min)
0C
Lead Free Status / RoHS Status
Supplier Unconfirmed
17
4.2
Handling
Normal ESD precautions are required during the handling of this module. This
transceiver is shipped in ESD protective packaging. It should be removed from
the packaging and otherwise handled in an ESD protected environment utilizing
standard grounded benches, fl oor mats, and wrist straps.
Test and operation
In most applications, the optical connector will protrude through the system chas-
sis and be subjected to the same ESD environment as the system. Once properly
installed in the system, this transceiver should meet and exceed common ESD
testing practices and fulfi ll system ESD requirements.
Typical of optical transceivers, this module’s receiver contains a highly sensitive
optical detector and amplifi er which may become temporarily saturated during
an ESD strike. This could result in a short burst of bit errors. Such an event might
require that the application re-acquire synchronization at the higher layers (e.g.
Serializer / Deserializer chip).
4.3
The JDSU 10 Gb/s 850 nm XFP optical transceiver is an international Class 1 laser
product IEC60825-1 second edition 2007. The JDSU 10 Gb/s 850 nm XFP optical
transceiver is an eye safe device when operated within the limits of this specifi cation.
Operating this product in a manner inconsistent with intended usage and specifi -
cation may result in hazardous radiation exposure.
Caution
Tampering with this laser based product or operating this product outside the
limits of this specifi cation may be considered an act of “manufacturing,” and will
require, under law, recertifi cation of the modifi ed product with the U.S. Food and
Drug Administration (21 CFR 1040).
ROHS COMPLIANT XFP OPTICAL TRANSCEIVER – 850NM
FOR UP TO 300M REACH
ESD Discharge (ESD)
Eye Safety

Related parts for PLRXXL-SC-S43-C1