ISP1507ABSTM STEricsson, ISP1507ABSTM Datasheet - Page 39

• Manufacturer Part Number: ISP1507ABSTM
• Manufacturer: STEricsson

Specifications of ISP1507ABSTM

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Power Supply Requirement: Single
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Pin Count: 32
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Lead Free Status / RoHS Status: Compliant

CD00222689
Product data sheet
3. Resume K: When the host wants to wake up the peripheral, it sets OPMODE[1:0] to
4. EOP: When STP is asserted, the ISP1507 on the host side automatically appends an
10b and transmits a K for at least 20 ms. The peripheral link sees the resume K on
LINESTATE, and asserts STP to wake up the PHY.
EOP of two bits of SE0 at low-speed bit rate, followed by one bit of J. The ISP1507 on
the host side knows to add the EOP because DP_PULLDOWN and DM_PULLDOWN
are set to 1b for a host. After the EOP is completed, the host link sets OPMODE[1:0]
to 00b for normal operation. The peripheral link sees the EOP and also resumes
normal operation.
Rev. 04 — 20 May 2010
ISP1507A; ISP1507B
ULPI HS USB OTG transceiver
© ST-ERICSSON 2010. All rights reserved.
39 of 81