S25FL016A0LMFI011 Spansion Inc., S25FL016A0LMFI011 Datasheet - Page 27

• Manufacturer Part Number: S25FL016A0LMFI011
• Manufacturer: Spansion Inc.

Specifications of S25FL016A0LMFI011

• Cell Type: NOR
• Density: 16Mb
• Access Time (max): 10ns
• Interface Type: Serial (SPI)
• Boot Type: Not Required
• Address Bus: 1b
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: SOIC W
• Program/erase Volt (typ): 2.7 to 3.6V
• Sync/async: Synchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8b
• Number Of Words: 2M
• Supply Current: 19mA
• Mounting: Surface Mount
• Pin Count: 8
• Lead Free Status / RoHS Status: Compliant

12. Absolute Maximum Ratings
13. Operating Ranges
February 27, 2009 S25FL016A_00_C4
Do not stress the device beyond the ratings listed in this section, or serious, permanent damage to the device
may result. These are stress ratings only and device operation at these or any other conditions beyond those
indicated in this section and in the
operation for extended periods at the limits listed in this section may affect device reliability.
Notes
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input at I/O pins may overshoot V
2. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
3. Stresses above those listed under
Note
Operating ranges define those limits between which functionality of the device is guaranteed.
Ambient Storage Temperature
Voltage with Respect to Ground: All Inputs and I/Os
Ambient Operating Temperature (T
Positive Power Supply
up to 20 ns. See
to V
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
CC
+ 2.0 V for periods up to 20 ns. See
Figure
12.2. Maximum DC voltage on output and I/O pins is 3.6 V. During voltage transitions output pins may overshoot
Description
V
V
D a t a
CC
CC
Figure 12.1 Maximum Negative Overshoot Waveform
Figure 12.2 Maximum Positive Overshoot Waveform
A
+2.0 V
+0.5 V
)
2.0 V
Absolute Maximum Ratings
+0.8 V
–0.5 V
–2 V
Description
Operating Ranges
Table 12.1 Absolute Maximum Ratings
S h e e t
Figure
Table 13.1 Operating Ranges
S25FL016A
12.2.
20 ns
20 ns
Industrial
Voltage Range
may cause permanent damage to the device. This is a stress rating only;
section of this document is not implied. Device
20 ns
20 ns
20 ns
20 ns
–0.5 V to V
–65°C to +150°C
Rating
CC
–40°C to +85°C
+0.5 V
2.7 V to 3.6 V
Rating
SS
to –2.0 V for periods of
27