LM050QC1T01 Sharp Electronics, LM050QC1T01 Datasheet - Page 6

• Manufacturer Part Number: LM050QC1T01
• Manufacturer: Sharp Electronics

Specifications of LM050QC1T01

• Lead Free Status / RoHS Status: Supplier Unconfirmed

2)
3)
1. Operator
2. Equipment
3. Floor
4. Humidity
5. Transportation and storage
6. Others
Keep following instructions to prevent electrostatic damages of CMOS LSIs, which are contained in the
LCD module.
LCD module is susceptible to external mechanical force, and even a very light stress would cause color
change. Therefore, make sure to mount LCD module to flat surface so that it will not be bent nor be
twisted when installing the module in the customer system.
There is a possibility that the static electricity is charged to equipment that has a function of peeling
something or making friction (ex: conveyer, soldering iron, working table). These equipments should
be grounded through approx. 1 × 10
Floor is an important part to leak static electricity, which is generated from human body or equipment.
There is a possibility that the static electricity is charged to them without leakage in case of insulating
floor, so the countermeasure (electrostatic earth: 1 × 10
Containers could also be easily charged up during transportation and storage. Make sure not to cause
ESD (electrostatic discharges) during transportation and storage.
The laminator (protective plastic film) is attached on the surface of LCD module to protect from
scratches, stains and dust. Make sure to peel off the laminator slowly with using ion blower.
Electrostatic shielding clothes shall be worn to avoid electrostatic discharges from human body.
Proper level of humidity of working area may reduce the resistance of the material that generates
electrostatics charges and also reduce the chance of charging up something. Keep the humidity over
50 %.
SPEC No.
8
LU02204A
ohms resistance.
8
MODEL No.
ohms) should be made.
LM050QC1T01
PAGE
4