LM050QC1T01 Sharp Electronics, LM050QC1T01 Datasheet - Page 7

• Manufacturer Part Number: LM050QC1T01
• Manufacturer: Sharp Electronics

Specifications of LM050QC1T01

• Lead Free Status / RoHS Status: Supplier Unconfirmed

4)
5)
1)
2)
･Precautions for Storage
Do not expose the LCD module to direct sunlight or strong ultraviolet light for long periods. Store in a
dark place.
Liquid crystal may be frozen and be deteriorated if stored below the rated storage temperature. Liquid
crystal may become an isotropic liquid if stored above the rated storage temperature and may not retain its
original properties. The humidity outside of specified range may damage the polarizers.
Therefore, the LCD module should always be stored within specified temperature range.
When the mating connector is inserted, it should be parallel to the used connector of LCD module and it
should be inserted on horizontal firm base. When the mating connector is fixed to LCD connector, it
should be inserted properly in order not to create a gap as shown “A”. Please insert the connector as both
edge is placed to the connect position of LCD connector.
It is recommended to connect GND in the customer’s system to GND in the LCD module by high
resistance means before the mating connector is inserted.
i) Method of correct insertion
ii) Method of wrong insertion
LCD Connector
SPEC No.
LU02204A
Fig.2
Fig.3
MODEL No.
LM050QC1T01
Ａ
Parallel
LCD Connector
LCD Connector
PAGE
5