179610-1 TE Connectivity, 179610-1 Datasheet - Page 9

• Manufacturer Part Number: 179610-1
• Description: AMP CT CRIMP-2 REC CONT. L/P
• Manufacturer: TE Connectivity

Specifications of 179610-1

• Product Type: Contact
• Termination Method To Wire/cable: Crimp
• Contact - Rated Current (a): 2
• Operating Voltage Reference: AC/DC, AC, DC
• Operating Voltage (vac): 125
• Operating Voltage (vdc): 125
• Wire/cable Size (awg): 26 – 30
• Mating Retention: Without
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Pre-Tin
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Operating Temperature (°c [°f]): -30 – +105 [-22 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.65 – 1.35 [0.0255 – 0.053]
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Loose Piece

ASHL-0005- ES REV B
4.
4.1
4.2
Quality Assurance Provisions:
Test Conditions:
Unless otherwise specified, all the tests shall be performed under any combination of the
following test conditions.
Temperature
Relative Humidity
Atmospheric Pressure
Test Specimens:
The test specimens to be used for the performance evaluation testing, shall be prepared in
accordance with AMP Application Specification, 114-5179, Termination of AMP CT
Connector, 2 mm Pitch, Crimp Type II, by using the samples selected from the current
production at random, and conforming to the requirements of the applicable product drawing.
AMP Shanghai Ltd.
Tyco Electronics
: 15~30
: 45~75 %
: 86.7~107kPa (650~800 mmHg)
o
C
9 of 11
PAGE
Document No.
108-5408
REV
B
LOC
ES