AD5551BRZ Analog Devices Inc, AD5551BRZ Datasheet - Page 13

• Manufacturer Part Number: AD5551BRZ
• Description: IC DAC 14BIT SERIAL-IN 8-SOIC
• Manufacturer: Analog Devices Inc

Specifications of AD5551BRZ

• Data Interface: Serial
• Settling Time: 1µs
• Number Of Bits: 14
• Number Of Converters: 1
• Voltage Supply Source: Single Supply
• Power Dissipation (max): 6.05mW
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Resolution (bits): 14bit
• Sampling Rate: 1MSPS
• Input Channel Type: Serial
• Supply Voltage Range - Analog: 2.7V To 5.5V
• Supply Current: 300µA
• Digital Ic Case Style: SOIC
• Number Of Channels: 1
• Resolution: 14b
• Interface Type: Serial (3-Wire, SPI, QSPI, Microwire)
• Single Supply Voltage (typ): 3/5V
• Dual Supply Voltage (typ): Not RequiredV
• Architecture: R-2R
• Power Supply Requirement: Single
• Output Type: Voltage
• Integral Nonlinearity Error: ±1LSB
• Single Supply Voltage (min): 2.7V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 8
• Package Type: SOIC N
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REFERENCE AND GROUND
As the input impedance is code-dependent, the reference pin
should be driven from a low-impedance source. The AD5551/
AD5552 operate with a voltage reference ranging from 2 V to
V
the reference, references below 2 V results in reduced accuracy.
Table 6 and Table 7 outline the analog output voltage for
particular digital codes. For optimum performance, Kelvin
sense connections are provided on the AD5552.
If the application does not require separate force and sense
lines, they should be tied together close to the package to
minimize voltage drops between the package leads and the
internal die.
for this product.
DD
. Although DAC’s full-scale output voltage is determined by
ADR291
and
ADR293
are suitable references
Rev. A | Page 13 of 16
POWER-ON RESET
These parts have a power-on reset function to ensure the output
is at a known state upon power-up. After power-up, the DAC
register contains all zeros, until data is loaded from the serial
register. However, the serial register is not cleared on power-up,
so its contents are undefined. When loading data initially to the
DAC, 14 bits or more should be loaded to prevent erroneous
data appearing on the output. If more than 14 bits are loaded,
only the last 14 are kept, and if fewer than 14 are loaded, bits
remain from the previous word. If the AD5551/AD5552 needs
to be interfaced with data shorter than 14 bits, the data should
be padded with zeros at the LSBs.
POWER SUPPLY AND REFERENCE BYPASSING
For accurate high-resolution performance, it is recommended
that the reference and supply pins be bypassed with a 10 μF
tantalum capacitor in parallel with a 0.1 μF ceramic capacitor.
AD5551/AD5552