SDED7-002G-NTY SanDisk, SDED7-002G-NTY Datasheet - Page 46

• Manufacturer Part Number: SDED7-002G-NTY
• Manufacturer: SanDisk
• Type: Flash Diskr

Specifications of SDED7-002G-NTY

• Density: 2GByte
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Temperature (min): -25C
• Operating Temperature (max): 85C
• Package Type: FBGA
• Mounting: Surface Mount
• Pin Count: 115
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 1.65/2.7V
• Operating Supply Voltage (max): 1.95/3.6V
• Programmable: Yes
• Lead Free Status / Rohs Status: Supplier Unconfirmed

Rev. 1.2
7.3.12 Endian Control Register
Description:
Address (hex): 9412 (128KB window) / 1412 (8KB window)
Type:
46
Bit number
Read/Write
Bit name
Reset value
SWAP
This 16-bit register is used to control the swapping of the low and high data
bytes when reading or writing with a 16-bit host. This provides an Endian-
independent method of enabling/disabling the byte swap feature.
Read / Write
D15-D9
R
RFU
0
Swap enable per byte. (This bit can be set by setting bit-0 OR bit-8). To clear
the bit both bits 0 & 8 need to be cleared to ‘0’;
0: Data from host is unchanged.
1: Data from host is swapped.
D8
R/W
SWAP
0
mDOC H3 EFD Featuring Embedded TrueFFS Data Sheet
D7-D1
R
RFU
0
D0
R/W
SWAP
0
mDOC H3 Registers
92-DS-1205-10