SDED7-002G-NTY SanDisk, SDED7-002G-NTY Datasheet - Page 62

• Manufacturer Part Number: SDED7-002G-NTY
• Manufacturer: SanDisk
• Type: Flash Diskr

Specifications of SDED7-002G-NTY

• Density: 2GByte
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Temperature (min): -25C
• Operating Temperature (max): 85C
• Package Type: FBGA
• Mounting: Surface Mount
• Pin Count: 115
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 1.65/2.7V
• Operating Supply Voltage (max): 1.95/3.6V
• Programmable: Yes
• Lead Free Status / Rohs Status: Supplier Unconfirmed

Rev. 1.2
16-Bit (Word) Data Access Mode
The mDOC H3 is 16 bit wide device. All accesses to and from the device are 16 bit wide.
mDOC H3 address lines should be connected to system host address lines, as depicted in Figure
20. mDOC H3 A0 line should be connected either to system host SA0 address line, or to VSS.
32-Bit (Double Word) Data Access Mode
In a 32-bit bus system that cannot execute word-aligned accesses, the system address lines SA0
and SA1 are always 0. Consecutive double words (32-bit words) are differentiated by SA2
toggling. Therefore, in 32-bit systems that support only 32-bit data access cycles, mDOC H3
signal A1 is connected to the first system address bit that toggles; i.e., SA2.
mDOC H3 address lines should be connected to system host address lines, as depicted in Figure
21.
mDOC H3 A0 line should be connected either to system host SA1 address line, or to VSS
62
Note:
Note:
SA16
The prefix “SA” indicates system host address lines
The prefix “SA” indicates system host address lines
Figure 21: Address Shift Configuration for 32-Bit Data Access Mode
Figure 20: 16-Bit Data Access Mode
System Host
System Host
mDOC H3
mDOC H3 EFD Featuring Embedded TrueFFS Data Sheet
Design Considerations
A0
92-DS-1205-10