TX43D57VC0CAA HITACHI, TX43D57VC0CAA Datasheet - Page 26

• Manufacturer Part Number: TX43D57VC0CAA
• Manufacturer: HITACHI

Specifications of TX43D57VC0CAA

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Hitachi Displays, Ltd. Date Feb. 23, 2009
10.2 PRECAUTION TO OPERATION
10.3 ELECTROSTATIC DISCHARGE CONTROL
10.4 PRECAUTION TO STRONG LIGHT EXPOSURE
10.5 PRECAUTION TO STORAGE, PACKAGE AND TRANSPORTATION
(1) The ambient temperature near the operated module should be satisfied with the absolute
(2) Noise spikes can cause miss-operation of a module. The level of noise spike should be
(3) Optical response time, luminance and chromaticity depend on the temperature of a TFT module.
(4) Sudden temperature change may cause dew on and/or in the module. Dew can cause damage
(5) Fixed patterns displayed on a module for a long time may cause after-image. It will be recovered
(6) A module has high frequency circuits. Sufficient suppression to electromagnetic interference
(7) Noise may be heard when a back-light is operated. If necessary, sufficient suppression should be
(8) The module should not be connected or removed while a main system works.
(1) Since a module consists of a TFT cell and electronic circuits with CMOS-ICs, which are very
(2) Protection film for a polarizer on a module should be slowly peeled off so that the electrostatic
(1) A module should not be exposed under strong light. Otherwise, characteristics of a polarizer and
(1) Modules should be stored in a dark place. It is prohibited to expose the module to sunlight or
(2) The surface of polarizers should not come in contact with any other object. It is recommended
(3) The module should not be transported when display side was downward.
When modules for replacement are stored for a long time, following precautions
should be taken care of :
maximum ratings. Unless it meets the specifications, sufficient cooling system should be
adopted to system.
as follows: -200mV
VDD including over- and under- shoot should be satisfied with the absolute maximum ratings.
Response time and saturation time of CCFL luminance become longer at lower temperature
operation.
to a polarizer and/or electrical contacting portion. Dew causes fading of picture quality.
soon.
should be done by system manufacturers. Grounding and shielding methods may be effective to
minimize the interference.
done by system manufacturers.
sensitive to electrostatic discharge, persons who are handling a module should be grounded
through adequate methods such as a wrist band. I/F connector pins should not be touched
directly with bare hands.
charge can be minimized.
color filter in a module may be degraded.
fluorescent light during storage. Modules should be stored at 5 to 35°C at normal humidity
(60%RH or less).
that modules should be stored in the Hitachi's shipping box.
It causes the breakdown of the module.
over- and under- shoot of VDD
Sh.
No.
3284PS 2614 – TX43D57VC0CAA-2
+200mV
Page
14-2/4