M68EML08JLJK Freescale Semiconductor, M68EML08JLJK Datasheet - Page 17

• Manufacturer Part Number: M68EML08JLJK
• Manufacturer: Freescale Semiconductor

Specifications of M68EML08JLJK

• Lead Free Status / Rohs Status: Not Compliant

1.6 Specifications
1.7 Target Cable Assemblies
User’s Manual
MOTOROLA
Maximum Clock speed
Temperature
MCU Extension I/O
Relative humidity
Power requirements
Dimensions
operating
storage
Characteristic
Table 1-1 lists EML08JLJK specifications
To connect your EML08JLJK board to a target system, you need the included
target cable and adapters shown in Figure 1-2.
The cable assembly for a 32-pin thin quad flat pack (LQFP) package consists
of: a flex cable, a target head adapter, a socket-saver and a LQFP surface
mount adapter.
One end of the target cable plugs onto EML08JLJK connectors P4 and P5. The
other end of the flex cable plugs onto the target head adapter, which plugs onto
the LQFP surface mount adapter.
You should solder the LQFP surface mount adapter directly onto the
target-system board in place of the MCU.
The socket-saver goes between the target head adapter and surface mount
adapter. If you use it, it will reduce wear on the target head adapter. After many
insertions, you can replace the socket-saver without replacing the entire target
head adapter.
Table 1-2 lists target cable and head part numbers appropriate for the
EML08JLJK.
Table 1-1 Specifications
General Information
32 MHz at 5V, 16 MHz at 3V
-10° to +50° C
-40° to +85° C
HCMOS Compatible at MCU voltage (5V or 3V)
0 to 90% (noncondensing)
5VDC supplied from the MMDS or MMEVS
5.5 X 7.7 X 0.83 inches (140 x 195 x 21 mm)
M68EML08JLJK Emulation Module - Version 1.0
Specifications
General Information
Specifications
17