9-1393792-7 TE Connectivity, 9-1393792-7 Datasheet - Page 259

• Manufacturer Part Number: 9-1393792-7
• Description: Electromechanical Relay DPDT 3A 12VDC 720Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 9-1393792-7

• Contact Arrangement: DPDT
• Dc Coil Voltage: 12 V
• Coil Current: 16.67 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 2 Form C
• Voltage Rating (vdc): 220V
• Voltage Rating (vac): 250V
• Dropout Volt (min): 0.6VDCV
• Coil Resistance: 720Ohm
• Pick-up Voltage (max): 8.4VDC
• Maximum Power Rating: 60W/125VA
• Operate Time: 5ms
• Contact Current Rating: 3A
• Contact Material: AgNi/Au
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Unsealed
• Product Height (mm): 11mm
• Product Depth (mm): 10mm
• Product Length (mm): 20.2mm
• Operating Temp Range: -25C to 85C
• Pin Count: 8
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Package / Case: DIP
• Lead Free Status / Rohs Status: Compliant

Ordering Information
VDE Approved Design
Our authorized distributors are more likely to stock the following items for immediate delivery.
KUEP-3A15-120
KUEP-3D15-12
KUEP-3D15-24
KUGP-7D55-24
KUIP-5A55-120
KUIP-11D55-12
KUIP-11D55-24
Ordering Information
High Voltage DC Switching
Our authorized distributors are more likely to stock the following items for immediate delivery.
Dimensions are shown for
reference purposes only.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Basic Series & Type:
KUIP = Enclosed relay designed for General VDE 0435.*
KUGP = Enclosed relay with 3mm open contact spacing.
Contact Arrangement:
5 = 1 Form C (SPDT)*
7 = 2 Form A (DPST-NO)
Coil Input:
A = AC, 50/60 Hz.*
D = DC*
Mountings:
1 = PLAIN CASE, SOCKET MOUNT.*
5 = BRACKET MOUNT CASE.*
Terminal & Contact Material:
3 = .047" (1.19mm) printed circuit board; silver.
Coil Voltage:
To 240VAC, 50/60 Hz. or 110VDC. (For 277VAC, consult factory.)*
* Options included in VDE file.
Basic Series & Type:
KUEP = Enclosed relay with magnetic blow-outs.
Contact Arrangement:
3 = 1X (SPST-NO-DM)
Coil Input:
A = AC 50/60 Hz.
Mountings:
1 = PLAIN CASE;
3 = with indicator lamp.*
5 = BRACKET MOUNT CASE
T = TOP FLANGE CASE.
Terminal & Contact Material:
5 = .187" (4.75mm) quick connect/solder; silver-
Coil Voltage:
To 240VAC, 50/60 Hz. or 110VDC. (For 277VAC, consult factory.)
cadmium-oxide.
KUIP-14A15-120
KUIP-14D15-12
KUIP-14D15-24
KUEP-3D15-110
KUEP-7D15-24
KUEP-11A15-120
D = DC
7 = 2A (DPST-NO)
Dimensions are in inches over
(millimeters) unless otherwise
specified.
KUEP-11D15-12
KUEP-11D15-24
Typical Part No.
T = TOP FLANGE CASE.*
Typical Part No.
*Indicator lamps are available on models with the following coils:
11 = 2 Form C (DPDT)*
14 = 3 Form C (3PDT)*
120-240VAC coils are UL recognized.
6-24VAC and DC, 110VDC and 120-240VAC. Only models with
(Form A and Form X arrangements only)*
5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide.*
11 = 2C (DPDT)
Catalog 1308242
B
B
7 = .047' (1.19mm) printed circuit; silver-cadmium-oxide.
Issued 3-03
KUIP
KUGP
KUEP
Specifications and availability
subject to change.
See coil data tables.
-3
-5
A
A
5
1
5
5
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
-120
-120
P&B
725