92250-588 FCI, 92250-588 Datasheet - Page 7

• Manufacturer Part Number: 92250-588
• Description: Telecom & Ethernet Connectors LOW PRO PCB 8 POS
• Manufacturer: FCI

Specifications of 92250-588

• Product: Telecom & Ethernet Connectors
• Usoc Codes: RJ45
• Number Of Ports: 1
• Shielding: Shielded
• Current Rating: 1 A
• Voltage Rating: 1000 V
• Housing Material: Nylon
• Color: Black
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TITLE
Copyright FCI
Form E-3334
Rev E
5.3.
5.4.
Finish
Design and Construction
5.2.2. Contact Materials
5.2.3. Shield Materials
5.2.4. Inductive Core Materials
The finish for applicable components shall be as specified herein or equivalent. Reference
BUS-02-057.
Connectors shall be of the design, construction, and physical dimensions specified on the
applicable product drawing.
Insulation co-ordination is not required for these connectors.
Single and Multi-Port Jack Assemblies
Contacts shall be made of high performance phosphor bronze alloy 510 in accordance to
ASTM B-103 or ASTM B-159.
Plating requirements in a contact area shall conform to one of the listed below:
A.
B.
C.
In the solder tail area, it is allowed to have one of the platings A, B, or C listed above or
0.00254mm (100 microinches) of tin-lead solder with composition of 90% tin and 10%
lead.
Shields shall be made of copper alloy. Allowable materials include Cartridge Brass alloy
C260, yellow brass C260 and phosphor bronze alloy C510. Shield thickness and material
temper shall be specified in detailed drawings.
Plating Finish: 0.00254mm min. of bright tin
Underplate:
Inductive cores shall be made of ferrite ceramics with Curie temperature above 250
degrees Celsius. Unless otherwise specified in the detailed drawings, the initial
permeability shall be above 800 and saturation flux density from 1800 to 3600 gauss.
Lubrication requirements shall be specified on the detailed drawings.
0.000075mm min. gold flash (3 microinches)
0.00076mm palladium nickel over (30 microinches)
0.00254mm nickel minimum (100 microinches)
0.00076mm gold finish over (30 microinches)
0.00127mm min. nickel underplate minimum (50 microinches)
0.00127mm gold finish over (50 microinches)
0.00127mm nickel underplate minimum (50 microinches)
TYPE
0.00051mm min. nickel or 0.001 min. copper
PRODUCT SPECIFICATION
PDM: Rev:J
STATUS:
NUMBER
PAGE
AUTHORIZED BY
STATUS
J.R. VOLSTORF
Released
7 of 26
UNRESTRICTED
GS-12-083
Printed: Dec 09, 2008
REVISION
DATE
7-Jun-06
J
GS-01-001
.