321026 TE Connectivity, 321026 Datasheet - Page 3

• Manufacturer Part Number: 321026
• Description: SPLICE, BUTT, PLASTI-GRIP, 26-22 AWG
• Manufacturer: TE Connectivity

Specifications of 321026

• Color: Yellow
• Diameter, Insulation: 0.080 in.
• Material, Sleeve: Vinyl, UL 94V-0
• Splice Type: Butt
• Wire Size: 26-22 AWG
• Product Type: Splice
• Sealed: No
• Body Style: PLASTI-GRIP
• Insulation: Yes
• Insulation Support: Insulation Support
• Insulation Diameter (mm [in]): 2.03 [.080] Max.
• Finish: Tin
• Wire/cable Size (cma): 202 – 810
• Butt Splice Type: Standard
• Wire Range (mm [awg]): 0.12-0.40² [26-22]
• Insulation Sleeve Material: Vinyl
• Government/industry Qualification: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece
• Lead Free Status / Rohs Status: RoHS Compliant part

3. REQUIREMENTS
3.1. Special Characteristics
Terminals with an open–ended tongue, such as spade terminals, can be installed and removed without
complete removal of the mounting screw. The terminal flat sides provide a locking feature against lateral
stress; flanged ends reduce possibility of terminal separation. The snap feature on spring spade terminals
increases resistance to axial loads if the mounting screw becomes loosened. The closed–end tongue, in
terminals such as ring tongue terminals, provides maximum protection against separation; these terminals are
well suited for high vibration environments.
3.2. Material
The terminal body and splice body is made of copper plated with tin—except the spring spade terminal is made
of phosphor bronze plated with tin or brass plated with tin, and the .093–Series plug terminal is made of brass.
Rivets on the 3–way link terminal and tube cap assembly are made of brass and the tube cap on the tube cap
assembly is made of copper zinc alloy. The insulation is made of vinyl or PVF
vinyl insulation is highly resistant to abrasion. The PVF
3.3. Storage
Rev C
PLASTI-GRIP Terminals and Splices
408–4303
408–4321
408–4448
408–6757
408–6764
408–6765
408–8044
408–8082
408–9177
408–9252
408–9535
408–9586
408–9684
408–9775
409–1950
409–1993
409–2586
409–2761
409–5128
409–5619
409–5842
409–5852
409–5860
409–5862
409–5878
A. Shelf Life
The terminals and splices should remain in the shipping containers until ready for use to prevent
deformation to the terminals and splices. The terminals and splices should be used on a first in, first out
basis to avoid storage contamination that could adversely affect signal transmissions.
B. Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the terminal and
splice insulation material.
C. Reeled Terminals and Splices
When using tape–mounted reeled terminals or splices, care must be taken to prevent stretching, sagging,
or other distortion that would prevent smooth feeding of the tape through automatic machine feed
mechanisms. Store coil wound reels horizontally and traverse wound reels vertically.
Pneumatic CERTI–CRIMP* Tool Holder Assemblies 356303–1 (Small) and 356302–1 (Large)
Straight Action Tool Holder Assembly 356304–1 (Logic)
Crimping Die Assembly 1213098–1
Hydraulic Hand Crimping Tool 59974–1
CERTI–LOK* Hand Tool Frame Assembly 169400
Crimping Die Assembly 169404
Miniature Quick–Change Applicator 687658–1 (Side–Feed with Mechanical Feed System)
Miniature Quick–Change Applicators 567200–2 and –3 (Side–Feed with Air Feed System)
Crimping Dies 47378–1, 48756–1, and 48757–1
PRO–CRIMPER* Hand Crimping Tool 58433–3
Hydraulic Crimping Head 58422–1
Pneumatic Crimping Heads 314269–1 and 314270–3
Inspection and Servicing of Hydraulic Crimping Heads 69051, 58422–1, and 69066
Pneumatic Crimping Heads 314868–1 and 314869–1
Hydraulic Power Units 69120–1 and 69120–2
AMP–TAPETRONIC* Machine 69875
AMP–TAPETRONIC Machine 68250–1
Pneudraulic Wiring Terminating Machine 68354–1
Basic AMP–O–LECTRIC* Model “K” Terminating Machine 1–471273–2
Model II AMPOMATOR* CLS Lead Making Machine 815800–1
AMP–O–LECTRIC Model “G” Terminating Machine 354500–[ ]
AMPOMATOR CLS III–G Lead–Making Machine 122500–[ ]
Hydraulic Hand Pump 314979–1
626 Pneumatic Tooling Assemblies 189721–[ ] and 189722–[ ]
AMPOMATOR CLS IV Lead–Making Machine 356500–[ ]
Tyco Electronics Corporation
2
insulation is highly resistant to radiation and solvents.
2
(polyvinylidene fluoride). The
114-2161
3 of 19