F3SJ-A0305P20 Sti (Scientific Technologies, Inc.), F3SJ-A0305P20 Datasheet - Page 2

• Manufacturer Part Number: F3SJ-A0305P20
• Description: Safety Light Curtain, 20mm Resolution, 305 mm Protected Height (Order Cables Sep
• Manufacturer: Sti (Scientific Technologies, Inc.)
• Type: Light Curtainr

Specifications of F3SJ-A0305P20

• Primary Type: Photoelectric
• Resolution: 20 mm (0.79 In.), 30 mm (1.18 In.)
• Protected Heights: 20 mm and 30 mm Protected Heights From 245 to 2495 mm (9.6 to 98 In.)
• Detection Capability: 20 mm Diameter
• Beam Gap: 15 mm
• Operating Range: 0.2-9 m
• Lead Free Status / Rohs Status: RoHS Compliant part

Muting Functions
F3SJ-A when an object must pass
through the detection zone, such
as when supplying a workpiece to
your equipment.
level of safety by only muting the
beams of the safety light curtain
where the workpiece passes
through, while preventing muting
in all other areas.
is used in applications where
the workpiece is set in position
each time by an operator, and
a turntable or positioning robot
then moves the workpiece to the
area where the work is performed.
A limit switch or other means is
used to detect when the robot is in
a safe position and muting is then
applied.
Muting temporarily disables the
Partial muting increases the
Position detection muting
The safety light curtain beams
in all areas other than where the
workpiece passes through are
constantly ON.
OmrOn Scientific technOlOgieS, inc.
USA
Tel. [phone]
Only the beams of the safety
light curtain interrupted by the
workpiece are muted.
canada
Tel. [phone]
Warning Zone Function
detection zone can be used as
warning zone to generate an
alarm when someone approaches
the danger zone. If the person
then enters the danger zone the
F3SJ-A will send a stop signal to
the guarded machine. In addition,
the auxiliary output can be used
to activate a flashing lamp to alert
the person in the warning zone.
F3SJ-A can be divided into two
zones or set a single warning zone
for multiple, cascaded F3SJ-A
units.
Dividing the zone between series-connected sensors
A single sensor can also be divided
Warning zone
Warning zone
With the F3SJ-A part of the
The detection zone for a single
Detection zone
Detection zone
For the Latest Information
On the Internet: www.sti.com or www.omron.ca
Convenient Serial Connection
of almost 2.5 m are available. If
you want to make changes in the
future, you can always extend
the protective height with series
connections. Up to four sets (400
beams) can be series connected
and with series-connection cables
up to 15 m in length, applications
can cover a wide area.
Sensors with protected heights
Approx. 10 m
(400 beams)
Total length:
20 mm gap between end beams when
connected side by side
Approx. 2.5 m
(100 beams)
Series connection cable
25 mm
up to 15 m long
20 mm gap between end beams when
connected side by side
Approx. 2.5 m
(100 beams)
Series connection cable
25 mm
up to 15 m long
F3SJ-A
D7
D