CLC001AJE-TR13/NOPB National Semiconductor, CLC001AJE-TR13/NOPB Datasheet - Page 7

• Manufacturer Part Number: CLC001AJE-TR13/NOPB
• Description: IC CABLE DRIVER DGTL ADJ 8-SOIC
• Manufacturer: National Semiconductor
• Series: CLCr
• Type: Driverr

Specifications of CLC001AJE-TR13/NOPB

• Number Of Drivers/receivers: 1/0
• Protocol: LVDS
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• For Use With: SD001EVK - BOARD EVALUATION CLC001DRIVECABLE02EVK - BOARD EVAL SERDES, CLC001, 012
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: CLC001AJE-TR13; CLC001AJETR

Device Operation
Figure 5 shows the CLC001 with an AC-coupled, single
ended input connection. The 82.5Ω resister in parallel with
A typical DC-coupled, twisted pair cable connection is shown
in Figure 6. The CLC001 is driven differentially. The line is
terminated with a termination resistor equal to the imped-
ance of the line being driven. The actual resistor value is
(Continued)
FIGURE 5. Single Ended 75Ω Coaxial Cable, AC-coupled
FIGURE 6. Twisted Pair Cable, DC-coupled
7
825Ω gives the equivalent termination resistance of 75Ω.
R
media specific, but typically is between 100 and 120Ω de-
pending upon the cable. This resistor should be located
close to the CLC001 inputs pins to minimize the resulting
stub length between the resistor and device pads.
BB
set at 5kΩ provides 1.25V of DC bias to the input.
10132906
10132905
www.national.com