XS2F-A421-G90A Omron, XS2F-A421-G90A Datasheet - Page 4

• Manufacturer Part Number: XS2F-A421-G90A
• Description: SENSOR CABLE, M12, MALE, 4POS, STRAIGHT
• Manufacturer: Omron

Specifications of XS2F-A421-G90A

• Connector Type B: Stripped End Lead
• Connector Type A: M12 Plug
• Cable Length: 5m
• No. Of Contacts: 4
• Cable Assembly Type: Sensor

Specifications
J MATERIALS AND FINISH
Note: Cover lock, screw and screw plate only pertain to models XS2G and XS2C.
J CHARACTERISTICS
Note: The combined contact resistance of XS2G and XS2C at a cable length of 50 mm is 30 mΩ max., at 20 mVDC max, 100 mA max.
XS2
Contact block
Contact
Fixtures
Cap
Cable clamp
Lock spring
Waterproof bushing
Screw
Screw plate
Cover
Cover lock
Ring
O-ring
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric strength
Enclosure rating
Electrical protection
Insertion tolerance
Vibration resistance
Assembled fixture strength
Cable holding
Ambient operating temperature
PBT resin (UL94V-0). Light gray finish
Brass/nickel base, 0.4 µm (0.016 µin. gold plating
Nickel-plated brass
Polyamide resin (UL94-0), black finish
Polyamide resin (UL94-0).
6 mm (0.24 in): white finish,
4 mm (0.16 in): black finish
LCP resin
Rubber
Nickel-plated iron (See Note.)
Nickel-plated steel (See Note.)
Assembled: PBT resin (UL94V-0), black finish
Molded: Polyvinyl chloride (UL94V-0), black finish
PBT resin (UL94V-0), black finish (See Note.)
Steel
Rubber
3 A
125 VDC
40 mΩ max., 20 mV max., 100 mA mx. (See Note.)
1000 MΩ at 500 VDC
1500 VAC for 1 minute
Leakage current: 1 mA max.
IEC IP67
Class 0
200 times minimum
At 10 to 500 Hz, 1.5 mm amplitude (or 10 G), no current shut-off for more than 1 µs
Tensile: 98 N (10 kgf) for 15 s
Torsion: 0.98 N m (10 kgf cm) for 15 sec.
Cable diameter
6 mm (0.24 in)
4 to 5 mm (0.16 to 0.2 in)
3 mm (0.1 in)
-25_C to 70_C (-13_F to 158_F)
Strength
98 N (10 kgf) for 15 s
49 N (5 kgf) for 15 s
29 N (3 kgf) for 15 s
5
XS2