NS15T-X01BV2 Omron, NS15T-X01BV2 Datasheet - Page 4

• Manufacturer Part Number: NS15T-X01BV2
• Description: TERMINAL PROGRAMMABLE 15"
• Manufacturer: Omron

Specifications of NS15T-X01BV2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: NS15TX01BV2; Z3180

6
What is data structure?
Even Simpler Equipment Operation with Outstanding Synergy
Support for CJ2 Data Structures
Program the PLC and Create PT Screens Using the Same Data Structures
Greatly Increase Design Efficiency and
Reduce Work over the Entire System
This special feature is made possible by combining an OMRON CJ2 PLC with an NS-series PT.
The data structures that you define on the CX-Programmer can be used on the CX-Designer simply by
dragging and dropping them.
Note: An EtherNet/IP connection is required. CX-Designer version 3.2 or higher is required. NS system version 8.4 or higher is required.
NS with LED backlight
LED backlight is newly installed for NS5 color-type models (SQ/TQ models)*
*LotNo.15Z0 or later
LED backlight allows backlight brightness adjustment of up to 32 levels.
The brightness can be adjusted from the operation screens; it is favorable for ship and vessel applications
CX-Programmer
CX-Programmer
Units for data Elements in the data structure
Previously, all of the variables had to be registered
separately simply because the data was in different units.
FROM
< Conventional three-level adjustment >
CJ2
Definition of the "Motor" Symbol
Data which is made of plural types of variables and treated as one data type.
EtherNet/IP
Drag
Drop
&
CX-Programmer
TO
By using data structure, variables that have the same
data structure can be easily reused.
CX-Designer
Supported Devices
<New 32-level adjustment>
NS Series
Definition of the "Motor" Symbol
CJ2
CS1/CJ1
CP1
Multi-vendor Support
Easy Transfer and Editing of Screens and Ladder Programs Using USB
Transfer ladder program data to the PLC via the PT simply by connecting a computer to the USB port
on the PT.
Transfer ladder data and perform online editing using USB via the PT even for a PLC that does not
have a USB port.
Design and Debugging Example
Startup and Maintenance Example
CX-Programmer
Note: CX-Programmer version 8.2 and higher support automatic online connection via the PT. NS system version 8.2 or higher is required.
Transfer of Ladder Programs and Screens without Changing the USB Cable Connection
Easier Debugging and Maintenance
If a CJ-series PLC is used, screens can be transferred to the PT by connecting the computer and the
PLC using a USB cable.
Screens can be transferred through the PLC simply by setting the communications path to USB
between the computer and the PLC in the transfer settings for the CX-Designer.
Easy Automatic Connection
PLC Connection via PT
A search is automatically made for the PLCs connected to the PT and the results are displayed using
the automatic online connection function in the CX-Programmer.
Just select a PLC from the list to connect. This function is also supported for PLCs over network layers.
PT Connection via PLC
PLC Connection via PT
CX-Programmer
CX-Programmer
Note: CX-Programmer version 8.2 and higher support automatic online connection via the PT.
CX-Designer
NS system version 8.2 or higher is required.
USB
USB relay cable
(IP65 oil-proof type)
(sold separately:
NS-USBEXT-1M)
Commercially
available
USB cable
Connected
Automatic
Transferring ladder programs
search
NS
NS
PLCs registered to the PT are automatically searched for.
Make the connection simply by selecting from the PLC list.
Serial connection
(1:N NT Link only)
Supported Devices
Easily transfer screens and ladder
programs from the USB port of the
PT.
• Easily connect a PLC and PT
Using a USB relay cable greatly
improves debugging at equipment
startup.
• Debug screens and ladder
across network layers.
programs with only one
commercially available USB
cable.
• Use a USB relay cable to
enable performing maintenance
from in front of the control panel.
For details, refer to page 20.
CJ2
PLC
CS1/CJ1
CP1
Multi-vendor Support
7