KIT_TC1793_SK Infineon Technologies, KIT_TC1793_SK Datasheet - Page 7
![no-image](/images/manufacturer_photos/0/3/327/infineon_technologies_sml.jpg)
KIT_TC1793_SK
Manufacturer Part Number
KIT_TC1793_SK
Description
KIT STARTER AUDO MAX TC1793
Manufacturer
Infineon Technologies
Series
AUDOMAXr
Type
MCUr
Specifications of KIT_TC1793_SK
Contents
Board, Adapters, Cables, CD, Power Supply
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
TC1793
Other names
KITTC1793SKIN
Figure 2
Application Note
!
!
!
!
!
!
The power distribution from the regulator to each power plane should be made over filters (see Figure
2).
RC Filters can be inserted in the supply paths at the regulator output and at the branchings to other
module supply pins like VDDOSC, VDDOSC3, VDDFL3, VDDPF, VDDPF3, VDDM, VDDMF, VDDAF
(see Figure 2). Using inductance or ferrite beads (5 – 10 µH) instead of the resistors can improve the
EME behaviour of the circuit and reduce the radiation up to ~10dBµV on the related supply net.
OCDS must be disabled.
Select weakest possible driver strengths and slew rates for all I/Os (see Scalable Pads AppNote
AP32111).
Use lowest possible frequency for SYSCLK.
Avoid cutting the GND plane by via groups. A solid GND plane must be designed.
Filtering of VDDOSC, VDDOSC3, VDDFL3, VDDPF, VDDPF3, VDDM, VDDMF, VDDAF supply
pins
Design Guideline for TC1793 Microcontroller Board Layout
7
PCB Design Recommendations
V1.0, 2010-04
AP32163