SPIS01 Xeltek, SPIS01 Datasheet - Page 7

• Manufacturer Part Number: SPIS01
• Description: SUPERPRO IS01 PROGRAMMER
• Manufacturer: Xeltek
• Series: SuperPro®r
• Type: ISP (In-System Reprogramming)r

Specifications of SPIS01

• Contents: Programmer, AC Adapter, Cable, CD, SD Card
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: E/EPROM, FLASH, PLD, Micros and more listed on Device Sheet
• Other names: 415-1053

Note: SDA and SCL are reserved for test, and generally are not provided for user.
Examples for connection of target system
Before programming the target device, you must be familiar with the target device, learn the
function of each pin of the device; read on the instructions on programming of this device
with ISP programmer carefully; know the hardware programming interfaces on the target
board; and confirm compliance of target board design with ISP requirements (see the
section “ISP requirements for the target system” for detail).
The programming operation steps are as follows:
1. Search the type of the chip to be operated in ISP programming software and view the
operation hint.
2. Exactly connect the signal lines (including GND) for the corresponding interfaces of ISP
programmer with the target board.
3. If the above “mass production” function is to be used, TPIN and TPOUT signal lines
should also be connected.
4. It is recommended that power of target board is supplied independently, especially for the
target board with high power consumption and with multiple power systems. If it is
confirmed that the power is supplied by programmer ISP cable, then, VCC (sometimes also
need Vpp) should be connected.
5. The independent power supplier of target board switches on the power.
6. Operation functions for running the programmer chip.
7