M29W128GL70N6E Micron Technology Inc, M29W128GL70N6E Datasheet - Page 19

• Manufacturer Part Number: M29W128GL70N6E
• Manufacturer: Micron Technology Inc

Specifications of M29W128GL70N6E

• Cell Type: NOR
• Density: 128Mb
• Access Time (max): 70ns
• Interface Type: Parallel
• Boot Type: Not Required
• Address Bus: 24/23Bit
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8/16Bit
• Number Of Words: 16M/8M
• Supply Current: 10mA
• Mounting: Surface Mount
• Pin Count: 56
• Lead Free Status / Rohs Status: Compliant

3.7.2
3.7.3
3.7.4
programmer method (8-bit mode)
- programmer method (16-bit
These codes can also be accessed by issuing an Auto Select command (see
Auto Select
Verify extended memory block protection indicator
The extended memory block is either factory locked or customer lockable.
The protection status of the extended memory block (factory locked or customer lockable)
can be accessed by reading the extended memory block protection indicator. It can be read
in auto select mode using either the programmer (see
method (see
The protection status of the extended memory block is then output on bit DQ7 of the data
input/outputs (see
Verify block protection status
The protection status of a block can be directly accessed by performing a read operation
with control signals and addresses set as shown in
If the block is protected, then 01h (in x 8 mode) is output on data input/outputs DQ0-DQ7,
otherwise 00h is output.
Hardware block protect
The V
the highest (M29W128GH) or lowest block (M29W128GL) is protected and remains
protected regardless of the block protection status or the reset pin state.
PP
/WP pin can be used to protect the highest or lowest block. When V
command).
Table 10
Table 4
and
and
Table
mode).
Table
11).
and
5, Bus operations in 8-bit and 16-bit mode).
Table 7: Read electronic signature - auto select mode
Table 8
Table 8
and
and
Table
Table
9.
9) or the in-system
PP
Section 6.1.2:
/WP is at V
19/94
IL