03805-06-0100 IEE (INDUSTRIAL ELECTRONIC ENGINEERS), 03805-06-0100 Datasheet - Page 4

• Manufacturer Part Number: 03805-06-0100
• Description: 33M1175
• Manufacturer: IEE (INDUSTRIAL ELECTRONIC ENGINEERS)

Specifications of 03805-06-0100

• No. Of Digits / Alpha: 80
• Character Count X Line: 20 X 4
• Character Size: 12.1mm
• Supply Voltage: 5V
• Display Mode: Reflective
• Display Area Width: 144.9mm
• Display Area Height: 59.5mm

1.0
1.1
This specification describes the parallel interface Daystar Nova model 03805–06–0100, a 4–line supertwist
liquid crystal display (LCD) with 20 characters per line.
Model Number Designation System
* Parallel standard, Serial optional
1.2
Daystar Nova modules provide alphanumeric information which is easily readable in high ambient light or in
darkness with optional backlight. The low power requirements of the modules make them suitable for portable
battery operated equipment. The wide operating temperature range (–30° to +80°C) is ideal for most outdoor
applications. The choice of a preferential viewing hemisphere is not necessary because of the excellent wide
angle viewing characteristics of the new Super Bi–refringent Effect (SBE) liquid crystal cell used in this display.
For applications where the display is remotely located up to 50 feet from the host processor, the serial data
input option should be used. The serial option model is described in IEE specification S03805–06–0200.
1.3
The Daystar Nova module is a self–contained 1/16 multiplexed unit. A simple parallel interface is provided and
can be configured as either 4 or 8 bits. The on–board microprocessor controls the display, multiplexing and
character decoding. The temperature compensation circuitry guarantees that the viewing characteristics are
optimized for all temperatures.
The SBE liquid crystal cell used in this display has a golden–green background with dark blue–black
characters.
The on–board character generator ROM generates 192 types of alphanumeric, numeric, katakana characters
and symbols. In addition, a character generator RAM allows the user to define eight additional characters.
A variety of high level functions allow the programmer to operate the display with simple and straightforward
software routines. One such feature automatically increments the character display position after each
character is written.
A single +5 Volt nominal power supply is required for operation of the LCD module. The unit operates from 4.50
Volts to 5.50 Volts. The typical power requirement for the module is 40mW.
The module weighs 6.3 oz. (179 grams).
Reflective STN LCD
Industrial Electronic Engineers, Inc.
GENERAL INFORMATION
Introduction
Application
Description
03805
Van Nuys, California
–
4x20 Format
06
–
Reserved
0
Scale: NONE
SIZE
A
1 =
2 = Serial Data Input
Parallel Data Input
CODE IDENT
1
05464
NO.
Rev C
*
0 = No Backlight
Sheet 4
S03805–06–0100
0
0 = Color N/A
0