LH28F640BFHE-PBTLHGA Sharp Electronics, LH28F640BFHE-PBTLHGA Datasheet - Page 13

• Manufacturer Part Number: LH28F640BFHE-PBTLHGA
• Manufacturer: Sharp Electronics

Specifications of LH28F640BFHE-PBTLHGA

• Lead Free Status / Rohs Status: Supplier Unconfirmed

8. If the program operation in one partition is suspended and the erase operation in other partition is also suspended, the
9. Full chip erase and OTP program operations can not be suspended. The OTP Program command can not be accepted while
10. Following the Clear Block Lock Bit command, block which is not locked-down is unlocked when WP# is V
11. Commands other than those shown above are reserved by SHARP for future device implementations and should not be
LH28F640BF series for details.
suspended program operation should be resumed first, and then the suspended erase operation should be resumed next.
the block erase operation is being suspended.
WP# is V
used.
IH
, lock-down bit is disabled and the selected block is unlocked regardless of lock-down configuration.
LHF64FHG
Rev. 2.45
IL
. When
11