APA075-TQ100I MICROSEMI, APA075-TQ100I Datasheet - Page 16

• Manufacturer Part Number: APA075-TQ100I
• Manufacturer: MICROSEMI

Specifications of APA075-TQ100I

• Family Name: ProASICPLUS®
• Number Of Usable Gates: 75000
• # Registers: 3072
• # I/os (max): 66
• Frequency (max): 180MHz
• Process Technology: 0.22um (CMOS)
• Operating Supply Voltage (typ): 2.5V
• Ram Bits: 27648
• Device System Gates: 75000
• Operating Supply Voltage (min): 2.3V
• Operating Supply Voltage (max): 2.7V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: TQFP
• Lead Free Status / Rohs Status: Not Compliant

Input/Output Blocks
To meet complex system demands, the ProASIC
family offers devices with a large number of user I/O
pins; up to 712 on the APA1000.
available supply voltage configurations (the PLL block
uses an independent 2.5 V supply on the AVDD and
AGND pins). All I/Os include ESD protection circuits. Each
I/O has been tested to 2000 V to the human body model
(per JESD22 (HBM)).
Six or seven standard I/O pads are grouped with a GND
pad and either a V
pad. Two reference bias signals circle the chip. One
protects the cascaded output drivers, while the other
creates a virtual V
I/O pads are fully configurable to provide the maximum
flexibility and speed. Each pad can be configured as an
input, an output, a tristate driver, or a bidirectional
buffer
Table 2-4 •
2 -6
Function
I/O pads configured as inputs
I/O pads configured as outputs
I/O pads configured as bidirectional
buffers
ProASIC
(Figure 2-6
PLUS
I/O Features
Flash Family FPGAs
DD
and
DD
supply for the I/O ring.
Table
(core power) or V
2-4).
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Table 2-3
Selectable 2.5 V or 3.3 V threshold levels
Optional pull-up resistor
Optionally configurable as Schmitt trigger input. The Schmitt trigger input option can be
configured as an input only, not a bidirectional buffer. This input type may be slower than
a standard input under certain conditions and has a typical hysteresis of 0.35 V. I/O macros
with an "S" in the standard I/O library have added Schmitt capabilities.
3.3 V PCI Compliant (except Schmitt trigger inputs)
Selectable 2.5 V or 3.3 V compliant output signals
2.5 V – JEDEC JESD 8-5
3.3 V – JEDEC JESD 8-A (LVTTL and LVCMOS)
3.3 V PCI compliant
Ability to drive LVTTL and LVCMOS levels
Selectable drive strengths
Selectable slew rates
Tristate
Selectable 2.5 V or 3.3 V compliant output signals
2.5 V – JEDEC JESD 8-5
3.3 V – JEDEC JESD 8-A (LVTTL and LVCMOS)
3.3 V PCI compliant
Optional pull-up resistor
Selectable drive strengths
Selectable slew rates
Tristate
DDP
(I/O power)
shows the
PLUS
v5.9
Table 2-3 •
Figure 2-6 • I/O Block Schematic Representation
Input Compatibility
Output Drive
Description
ProASIC
3.3 V / 2.5 V Signal Control Drive
Strength and Slew-Rate Control
EN
A
Signal Control
Y
3.3 V / 2.5 V
PLUS
I/O Power Supply Voltages
Control
Pull-up
2.5 V
2.5 V
2.5 V
Pad
V
DDP
3.3 V
3.3 V
3.3 V