SI3018-F-GSR Silicon Laboratories Inc, SI3018-F-GSR Datasheet - Page 98

• Manufacturer Part Number: SI3018-F-GSR
• Manufacturer: Silicon Laboratories Inc

Specifications of SI3018-F-GSR

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Pin #
11
12
13
14
15
16
17
18
19
20
Pin Name
SDITHRU
RESET
TGDE
SCLK
GND
TGD
C2A
C1A
V
V
DD
A
TIP Ground Detect Input.
Used to detect current flowing in TIP for supporting ground start applications.
TIP Ground Detect Enable Output.
Control signal for the ground detect relay. Used to support ground start applications.
Reset Input.
An active low input that is used to reset all control registers to a defined, initialized
state. Also used to bring the Si3050 out of sleep mode.
Isolation Capacitor 2A.
Connects to one side of the isolation capacitor C2. Used to communicate with the
line-side device.
Isolation Capacitor 1A.
Connects to one side of the isolation capacitor C1. Used to communicate with the
line-side device.
Regulator Voltage Reference.
This pin connects to an external capacitor and serves as the reference for the internal
voltage regulator.
Digital Supply Voltage.
Provides the 3.3 V digital supply voltage to the Si3050.
Ground.
Connects to the system digital ground.
Serial Port Bit Clock Input.
Controls the serial data on SDO and latches the data on SDI.
SDI Passthrough Output.
Cascaded SDI output signal to daisy-chain the SPI interface with additional devices.
Table 25. Si3050 Pin Descriptions (Continued)
Rev. 1.31
Description
Si3050 + Si3018/19
99