SC28L92A1A,518 NXP Semiconductors, SC28L92A1A,518 Datasheet - Page 69

• Manufacturer Part Number: SC28L92A1A,518
• Description: IC UART DUAL W/FIFO 44-PLCC
• Manufacturer: NXP Semiconductors
• Series: IMPACTr

Specifications of SC28L92A1A,518

• Features: False-start Bit Detection
• Number Of Channels: 2, DUART
• Fifo's: 16 Byte
• Voltage - Supply: 3.3V, 5V
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 44-LCC (J-Lead)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935263293518; SC28L92A1A-T; SC28L92A1A-T

NXP Semiconductors
SC28L92_7
Product data sheet
14.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 69.
Table 70.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
2.5
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 69
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
70
Rev. 07 — 19 December 2007
27.
3.3 V/5.0 V Dual Universal Asynchronous Receiver/Transmitter
Package reflow temperature ( C)
Volume (mm
< 350
235
220
Package reflow temperature ( C)
Volume (mm
< 350
260
260
250
3
3
)
)
Figure
350 to 2000
260
250
245
27) than a PbSn process, thus
220
220
350
> 2000
260
245
245
SC28L92
© NXP B.V. 2007. All rights reserved.
69 of 73