UPC3221GV-A NEC, UPC3221GV-A Datasheet - Page 16

• Manufacturer Part Number: UPC3221GV-A
• Description: IC AGC AMPLIFIER 8-SSOP
• Manufacturer: NEC

Specifications of UPC3221GV-A

• Applications: Automatic Gain Control (AGC)
• Output Type: Differential
• Number Of Circuits: 1
• -3db Bandwidth: 100MHz
• Current - Supply: 33mA
• Voltage - Supply, Single/dual (±): 4.5 V ~ 5.5 V
• Mounting Type: Surface Mount
• Package / Case: 8-SSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NOTES ON CORRECT USE
RECOMMENDED SOLDERING CONDITIONS
methods and conditions other than those recommended below, contact your nearby sales office.
16
Infrared Reflow
VPS
Wave Soldering
Partial Heating
Caution Do not use different soldering methods together (except for partial heating).
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation).
(3) The bypass capacitor should be attached to V
This product should be soldered and mounted under the following recommended conditions.
Soldering Method
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (package surface temperature)
Time at temperature of 200°C or higher
Preheating time at 120 to 150°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (pin temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
Data Sheet PU10171EJ03V0DS
Soldering Conditions
CC
line.
: 260°C or below
: 120±30 seconds
: 215°C or below
: 30 to 60 seconds
: 260°C or below
: 1 time
: 350°C or below
: 3 seconds or less
: 10 seconds or less
: 60 seconds or less
: 3 times
: 0.2%(Wt.) or below
: 25 to 40 seconds
: 3 times
: 0.2%(Wt.) or below
: 10 seconds or less
: 0.2%(Wt.) or below
: 0.2%(Wt.) or below
Condition Symbol
µ
WS260
HS350
VP215
IR260
For soldering
PC3221GV