292323-6 TE Connectivity, 292323-6 Datasheet - Page 4

• Manufacturer Part Number: 292323-6
• Manufacturer: TE Connectivity
• Series: Ar

Specifications of 292323-6

• Size: Standard
• Gender: Receptacle
• Number Of Ports: 2
• Orientation: Right Angle
• Mount Location: Top
• Panel Ground Type: Ground Finger
• Termination Method: Solder
• Tail Length (mm [in]): 3.24 [0.128]
• Locking Feature: Without
• Led: Without
• Panel Ground: With
• Pcb Mount Retention Type: Kinked Leg(s)
• Shell Plating: Bright Tin
• Assembly Process Feature: Without Pick and Place Cover
• Locating Post(s): Without
• Number Of Positions: 4
• Contact Termination Type: Through Hole
• Contact Plating, Mating Area, Material: Gold or Gold Flash over Palladium Nickel
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.762 [30]
• Housing Color: Black
• Industry Standard: USB 2.0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Usb-if Test Id Number (tid): Not Submitted For Testing
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Panel Ground Location: Center
• Packaging Method: Tray

ASHL-0005- ES REV A
NOTE
3.5.10
3.5.11
3.5.12
3.5.13
3.5.14
3.5.15
3.5.16
Para.
3.5.9
Unmating Force
Cable Retention Force
Durability
Solder ability
Thermal Shock
Temperature life
Humidity-Temperature
Cycling
Mixed flowing Gas
Shall meet visual requirement, show no physical damage and shall meet requirement of additional tests
as specified in Test Sequence in Figure 2.
Test Items
AMP Shanghai Ltd
Tyco Electronics
10 N minimum
Cable shall not dislodge from
crimp
See Note
Solderable area shall have
minimum of 95%solder coverage
See Note
See Note
See Note
See Note
Environmental Requirements
Figure 1 (end)
Requirements
PAGE NO
4
AMP Spec 109-42
Condition A
Measure force necessary to unmate
samples at maximum rate of 12.5 mm per
minute.
AMP Spec 109-46
Apply axial load 25 N to cable
AMP Spec 109-27
Mate and unmate samples for 1500 cycles
at maximum rate of 200 cycles per hour
AMP Spec 109-11-1
Subject surface mount samples to Solder
ability.
AMP Spec 109-11-1
Subject through hole samples to Solder
ability.
AMP Spec 109-22
Subject mated samples to 25 cycles
between -55
AMP Spec 109-43
Subject mated samples to temperature life
at 85
AMP Spec 109-23-3
Condition B
Subject samples to 10 ,24 hours cycles
between 25
AMP Spec 109-85-2
Subject mated samples to Environmental
class
108-60034
o
C for 315 hours
!for 14 days.
o
o
C and +85
C and 65
Procedures
o
C at 95% R.H.
o
C.
REV LOC
O
ES