1600636-6 TE Connectivity, 1600636-6 Datasheet - Page 5

• Manufacturer Part Number: 1600636-6
• Manufacturer: TE Connectivity

Specifications of 1600636-6

• Product Series: XL
• Connector Type: Connector Assembly
• Termination Style: Panel
• Mating Type: Blindmate
• Guides: With
• Mating Functionality: Mate First-Break Last
• Voltage Rating (signal) (vac): 60
• Voltage Rating (power) (vac): 300
• Voltage Rating (power) (vdc): 200
• Sequencing: Yes
• Connector Configuration Orientation: Right-to-Left
• Centerline, Dc Module (mm [in]): 6.35 [0.250]
• Centerline, Ac Module (mm [in]): 7.62 [0.300]
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Contact Type: Socket
• Connector Style: Receptacle
• Housing Material: Thermoplastic - GF
• Total Number Of Dc Power: 12
• Total Number Of Ac Power: 4
• Total Number Of Signal: 24
• Connector Contact Configuration (no. Of Pos./type): 4/AC Power, 24/Signal, 12/DC Power
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application Use: Cable-to-Board

Rev C
Crimp tensile.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
4.
See Note.
See Note.
See Note.
See Note.
14 (dual crimp)
12 (dual crimp)
16 (dual crimp)
Wire Size
Wire Size
(AWG)
(AWG)
10
12
14
ENVIRONMENTAL
22
24
26
8
Power Contact
Signal Contact
Figure 3 (end)
Requirement
(Lbs min)
(Lbs min)
Tensile
Tensile
11.0
80
80
50
80
70
50
7.0
4.0
80
EIA-364-8.
Determine crimp tensile at a rate of
.5 inch per minute. Clamp contacts
as shown in Figure 6.
EIA-364-32.
Subject specimens to 36 cycles
between -20 and 105
EIA-364-31, Method III, Condition
B without cold shocks.
Subject specimens to 10 cycles (10
days) between 25 and 40
to 95% RH.
EIA-364-17, Method A, Test
Condition 4.
Subject mated specimens to 105
for 504 hours (21 days).
EIA-364-65, Class IIA (4 gas).
Subject mated specimens to
environmental Class IIA for 20
days.
Procedure
/
C .
108-2157
/
C at 80
5 of 9
/
C