1-280050-2 TE Connectivity, 1-280050-2 Datasheet - Page 31

• Manufacturer Part Number: 1-280050-2
• Manufacturer: TE Connectivity

Specifications of 1-280050-2

• Product Type: Terminal
• Terminal Type: Receptacle
• Mating Area Interface Dimensions (mm [in]): 6.35 x 0.81 [.250 x .032]
• Receptacle Style: Flag
• Insulation Support: Insulation Support
• Wire/cable Type: Stranded
• Insulation Diameter (mm [in]): 2.36-3.30 [.093-.130]
• Insertion Force: Normal
• Finish: Tin
• Crimp Type: F-Crimp
• Board Mount: No
• Weld Tab: Without
• Wire Range (mm [awg]): 0.50-1.50² [20-15]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

AMP MONO-SHAPE
MARK II Connectors in
In-Line Mating Technology
MONO-SHAPE Mark II
Connector System was
developed according to the
newest level of knowledge and
standard.
The requirements of advanced
In-Line mating technology for
the component and contact of
printed circuit board (PCB) is
granted by the two versions
TAB and PCB connector
systems.
System is designed to
maximise the full integration
with the application tooling,
assuring the flexibility in the
harness design.
This system is suitable for a
wide wire size range of
conductor and current carrying
capacity up to 16 A.
Double termination is possible
with 0.5 and 0.5mm
0.75mm
(See application spec.
114-20104 for details)
The connectors are available in
1 to 10 positions (TAB Version)
with interior locking device and
2 to 12 positions (PCB Version)
Connectors are supplied in
chain and provided with all
keying and polarisation ribs the
connectors can be handled
automatically with a modern
Application Tooling Equipment.
Wiring faults checked and
eliminated through high
automation.
Application Machines shall
provide to print a colour code
mark on the connectors cover
after wire termination, feasible
on all connectors configuration,
for connector identification on
harnesses.
Products for Industrial &
Commercial Applications
2
conductors.
2
or 0.5 and
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Technical Features
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
Introduction
Housing moulded in different
materials for different
applications
Standard, Part Numbers with
pre-dash 0 (as 0-284471-1)
Housing in unfilled PA 6/6,
UL 94V-2
For UL94V0, Part Numbers
with pre-dash 1
(as 1-284471-1)
Housing in unfilled PA 6/6,
UL 94V-0
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
High Operating Temperature
(up to 130°), Part Numbers
with pre-dash 2 (as 2-
284471-1) Unfilled PA 4/6,
UL 94V-2 (available for TAB
Version only)
Glow Wire 750° no flame,
Part Numbers with pre-dash
3 (as 3-284471-1) Housing
in unfilled PA 6, UL 94V-2
Specifications subject to
change.
Dimensions are
millimetres over inches
METRIC
www.tycoelectronics.com
Catalogue 1654742
Revised 5-04
2031
2