1-280050-2 TE Connectivity, 1-280050-2 Datasheet - Page 43

• Manufacturer Part Number: 1-280050-2
• Manufacturer: TE Connectivity

Specifications of 1-280050-2

• Product Type: Terminal
• Terminal Type: Receptacle
• Mating Area Interface Dimensions (mm [in]): 6.35 x 0.81 [.250 x .032]
• Receptacle Style: Flag
• Insulation Support: Insulation Support
• Wire/cable Type: Stranded
• Insulation Diameter (mm [in]): 2.36-3.30 [.093-.130]
• Insertion Force: Normal
• Finish: Tin
• Crimp Type: F-Crimp
• Board Mount: No
• Weld Tab: Without
• Wire Range (mm [awg]): 0.50-1.50² [20-15]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

IDC Workstation –
SIM 50
This semi-automatic machine
was designed for the sequential
processing of AMP multifitting
Mark II IDC connector system
and its variations such as direct
and indirect mating connector
with interior or exterior locking.
A processing sequence can
consist of one or more IDC con-
nectors of the same or different
numbers of positions, but a
maximum total of 12 positions.
The specific key coding of the
connectors is performed during
the termination process by an
integrated cutting device.
The wires are manually fed into
the machine and then
automatically terminated.
Integrated control tests ensure
a high quality product.
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Technical Features
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
Application Tooling (continued)
Processing of all versions of
the AMP multifitting Mark II
connector system without
additional set up time.
Termination of the wire with
active support of the IDC
contact.
Termination of two wires
in the same slot is
programmable.
Colour coding on the
connector cover possible.
Wire exit angle can be bent
180°.
Short set up and change-
over times.
High output.
Correct wire insertion length
and key codings are
continually checked.
Good / bad sorter; faulty
connections will be destroyed.
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Processing Modules of the SIM 50
50 different production
programs can be stored.
Operator PC interface
displaying machine status
and production data;
different languages available.
Low maintenance costs and
the capability of off-site
troubleshooting via modem.
Ergonomic and easy to oper-
ate through a Touch Screen
Display.
Specifications subject to
change.
Dimensions are
millimetres over inches
METRIC
Technical Data
Power Supply:
230 V AC, 50 Hz
Air Pressure:
6 bar
Wire Size Range:
0.35 mm
Insulation Diameter Range:
1.2 mm up to 3.0 mm
Wire Type:
Stranded conductors
www.tycoelectronics.com
2
Catalogue 1654742
up to 1.5 mm
Revised 5-04
2
2043
2