PM8621-BI PMC-Sierra, Inc., PM8621-BI Datasheet - Page 217

• Manufacturer Part Number: PM8621-BI
• Description: Driver, NSE/SBS Narrowband Chipset Driver
• Manufacturer: PMC-Sierra, Inc.

Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-2021248, Issue 1
Outputs
Returns
Prototype
Inputs
Outputs
Returns
Prototype
Inputs
Outputs
Returns
Enabling/Disabling the LVDS Link: dalNbcsSswCntlLkc
This function enables/disables the specified link.
Accessing Link Operation Mode: dalNbcsSswCntlLkcOpMode
This function allows the user to get or set the current operating mode of the specified link.
A link is by default in standby (low-power) mode. The user can reset the port (which will be in
normal mode again after the reset) or put it in a standby (low power) mode. Resetting or putting
the port in normal mode will bring the port out of standby mode.
Configuring LVDS link parameters: dalNbcsSswCfgLkc
This function allows user to configure the parameters for a specified link. Parameters are: J0 byte
insertion, and path termination mode.
None
Success =
Failure = <NBCS error codes>
INT4 dalNbcsSswCntlLkc(void* deviceInfo, UINT1
dir, UINT1 port, UINT1 enable)
deviceInfo
dir
port
enable
None
Success =
Failure = <NBCS error codes>
INT4 dalNbcsSswCntlLkcOpMode(void* deviceInfo,
UINT1 port, UINT1 mode)
deviceInfo
port
mode
None
Success = NBCS_SUCCESS
Failure = <NBCS error codes>
NBCS_SUCCESS
NBCS_SUCCESS
: device information handle
: device information handle
: 0 = transmit 1 = receive
: the port number ranges from 0-31
: 0 = disable, 1 = enable
: port number (from 0-31 for NSE-20G
: operating mode: 0 = standby, 1 =
and 0-11 for NSE-8G)
normal, 2 = reset
Narrowband Chipset Device Driver Manual
Space Switch Device Driver Interface
217