SCA01810-TFN-LNN Shelly, Inc., SCA01810-TFN-LNN Datasheet - Page 18

• Manufacturer Part Number: SCA01810-TFN-LNN
• Description: Innovative Display Technologies 17171 Murphy Avenue
• Manufacturer: Shelly, Inc.


2. Inspection condition
This specification is made to be used as the standard acceptance/rejection criteria for Color mobile
phone LCM.
1 Sample plan
20~40W light intensity, all directions for inspecting the sample should be within 45°against
perpendicular line.
3. Definition of inspection zone in LCD.
INSPECTION CRITERION
Sampling method shall be in accordance with MIL-STD-105D, inspection level II and based on:
Viewing distance for cosmetic inspection is about 30cm with bare eyes, and under an environment of
Zone A: character/Digit area
Zone B: viewing area except Zone A (Zone A + Zone B = minimum Viewing area)
Zone C: Outside viewing area (invisible area after assembly in customer’s product)
Fig.1 Inspection zones in an LCD.
Note: As a general rule, visual defects in Zone C are permissible, when it is no trouble for
Major defect: AQL 0.65
Minor defect: AQL 1.5
quality and assembly of customer’s product.
A
B
C
18 |
P a g e