AMBE-1000 Digital Voice Systems, Inc., AMBE-1000 Datasheet - Page 58

• Manufacturer Part Number: AMBE-1000
• Manufacturer: Digital Voice Systems, Inc.

7.
7.1
7.1.1
The AMBE-1000 is not recommended for new designs.
Please refer to the AMBE-2000/2020 product line.
Storage
Hardware Information
Special Handling Instructions
Although the AMBE-1000™ Vocoder Chip incorporates input protection circuitry, to
avoid damage from the accumulation of a static charge, industry standard electrostatic
discharge precautions and procedures must be employed during handling and
mounting.
The 100 pin TQFP package design of the AMBE-1000™ Vocoder Chip allows it to be
mounted by infrared reflow, vapor-phase reflow or equivalent processes. The peak
package body temperature must not exceed 220 C.
The AMBE-1000™ Vocoder Chip requires baking before mounting, if any of the following
conditions exist:
DVSI’s recommended bake out procedures:
To insure maximum shelf life in long term storage, AMBE-1000™ Vocoder Chips should
be kept in a moisture controlled package at <40 C and <90% Relative Humidity
The AMBE-1000 is not recommended for new designs.
Humidity indicator card (included in packaging) shows exposure to > 20
% when read at 23 C + 5 C
Devices were not shipped in a package designated as “moisture
controlled.”
Not mounted within 168 hours of receipt, at factory conditions of <30 C
and <60% RH
If the device has not been stored at < 20% RH
For low-temperature device containers: 192 hours at 40 C + 5 C / -0 C
and < 5% Relative Humidity
For high-temperature device containers : 24 hours at 125 C + 5 C.
Please refer to the AMBE-2000/2020 product line.
Visit us at www.dvsinc.com
page 58