LM3S8933 Luminary Micro, Inc, LM3S8933 Datasheet - Page 502

• Manufacturer Part Number: LM3S8933
• Description: Lm3s8933 Arm Microcontroller
• Manufacturer: Luminary Micro, Inc

Analog Comparators
18
502
Analog Comparators
An analog comparator is a peripheral that compares two analog voltages, and provides a logical
output that signals the comparison result.
The LM3S8933 controller provides three independent integrated analog comparators that can be
configured to drive an output or generate an interrupt or ADC event.
Note:
A comparator can compare a test voltage against any one of these voltages:
■
■
■
The comparator can provide its output to a device pin, acting as a replacement for an analog
comparator on the board, or it can be used to signal the application via interrupts or triggers to the
ADC to cause it to start capturing a sample sequence. The interrupt generation and ADC triggering
logic is separate. This means, for example, that an interrupt can be generated on a rising edge and
the ADC triggered on a falling edge.
An individual external reference voltage
A shared single external reference voltage
A shared internal reference voltage
Not all comparators have the option to drive an output pin. See the Comparator Operating
Mode tables in “Functional Description” on page 503 for more information.
Preliminary
July 25, 2008